Preparation and Simple User Guide

Steps to prepare and use the machine simply

Follow the steps below to prepare and use the machine simply.

However, before you perform these steps, see Important Safety Information (page 146), and Advice for Preparation and Simple User Guide (page 5).

If you need further information, refer to BASIC FAX USE or ADVANCED FAX USE.

1 Read the Quick Setup Guide

Follow the instructions on the Brother Quick Setup Guide to set up the machine.

2 Setting the Document

You can scan the document for faxing and copying from either the Automatic Document Feeder or from the glass platen.

Using the Automatic Document Feeder

The automatic document feeder can hold up to 30 pages, feeding each one individually through the machine. Use standard (75 gsm) paper when using the Automatic Document Feeder. Always fan the pages well before placing them in the feeder.

Recommended Environment

Temperature: 20-30˚C (68-86˚F)

Humidity: 50%-70%

• DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples, paper clips, paste or tape attached.

• DO NOT use cardboard, newspaper, or fabric. (To copy or scan this kind of document, see Using the Glass Platen, page 3)

Make sure documents written with ink are completely dry.

Documents must be from 14.8 to 21.6 cm wide, and from 14.8 to 35.6 cm long.

1 Unfold the document tray

extension.

Document

tray extension

 

2Unfold the document stopper.

Document

Stopper

1