Setting Up the Scanner Configurations

The Pop-Up application stores eight different scanning modes. Each time you scan an original, you will choose the most appropriate scanning mode from the following:

Faxing, Filing and Copying

Text for OCR

Photos

Photos (High Quality)

Photos (Quick Scan)

Custom

Draft Copy

Fine Copy

Each mode has its own set of stored settings. You can keep the factory default settings or change them at any time:

Resolution—Select the scanning resolution you most frequently use. Colour Mode—From the pull-down list, select

Scan Size—From the pull-down list, select Brightness—Slide the adjuster from 0% to 100% Contrast—Slide the adjuster from 0% to 100%

Click OK to save your changes. If you make a mistake or later decide to return to the original default setting, just click the Restore Defaults button when the scanning mode is displayed.

To Access the Scanner Configurations Screen

1 Place the original face up in the Automatic Document Feeder. Then the Brother Control Centre screen pops up.

2 Right-click the appropriate Control Centre button to display Configurations…, then click it. The configuration screen for that Control Centre button will appear.

3 To save your settings, press the OK button—OR—To return to the factory default settings, press the Restore Defaults button.

You can not access the Scanner Configuration screen by placing the document on the glass platen.

Perform an Operation from the Control Centre Screen

If you see this screen it means you left-clicked a button in the Control Centre window without first placing an original in the Automatic Document Feeder.

Place the original in the Brother machine’s Automatic Document Feeder, then click OK to return to the

Control Centre screen.

If you want to scan the original from the glass platen, please use Scan to key on the Control Centre screen.

PRINTER/SCANNER

Using the Windows®-Based Brother MFL-Pro Control Centre 84