6 Hold the new ink cartridge as shown in the illustration, and remove the sealing tape from the side of the ink cartridge. Carefully peel the tape in the direction away from you.

Peel in the direction away from you!

Opening

To prevent spilling ink and staining your hands and clothing, remove the sealing tape gently.

7 Each colour has its own correct position. Insert each new ink cartridge into the carriage, and then press the ink cartridge cover until it clicks.

8 After installing the ink cartridges, close the Scanner Cover. The machine prepares for a “head cleaning” and goes online. The display prompts you to verify a new ink cartridge was inserted for each colour you removed. Example: DID YOU CHANGE BLCK? 1.YES 2.NO.

If the ink cartridge you installed is not a brand new one, please make sure to select 2.

9 For each new cartridge, press 1 on the dial pad to reset the ink dot counter for that colour automatically.

The machine will enter a cleaning cycle for approximately three minutes for each replaced cartridge. The display alternately shows CLEANING and PLEASE WAIT.

When the machine completes the cleaning cycle, the display returns to Standby mode (date and time).

If ink gets in your eyes, irrigate them with water immediately and consult a doctor if you are concerned.

MAINTENANCE

Troubleshooting and Maintenance 144