When you are sending a fax, the machine will scan documents into memory before sending. Then, as soon as the phone line is free, the machine will start dialling and sending the fax. If memory becomes full, the machine will send the document in real time (even if REAL TIME TX is set to
OFF).
Sometimes you may want to send an important document immediately, without waiting for memory transmission. You can set REAL TIME TX to ON.
1 Insert the document face up in the Automatic Document Feeder, or face down on the glass platen.
2 Press Menu/Set, 2, 2, 5.
3 To change the default setting, press 
or 
to select ON (or OFF) and press Menu/Set.
Go to Step 
or 
to select NEXT FAX ONLY.
4 Press Menu/Set.
5 For the next fax only, press 
or 
to select ON (or OFF) and press Menu/Set.
6 Press 1 if you want to select additional settings. The display returns to the SETUP SEND
7 If you switched ON Real Time Transmission for the next fax only, enter the fax number and press Mono Fax Start.
This setting has no effect on Colour faxes. Colour faxes are always sent by using Real Time Transmission.
25Chapter 2