Brother MFC-5100C manual 24

To access the menu, press Menu/Set.

To exit, press Stop/Exit.

Main Menu	Submenu		Menu		Options		Descriptions	Page
		Selections
						to	accept
2. FAX	1. SETUP	3. F/T RING		70			Sets the time for “F/T
(Continued)	RECEIVE		TIME	40			pseudo-ring” in Fax/Tel	27
	(Continued)			30 (Example for			(F/T) Mode.
				20 Australia)
		4.	FAX	ON			Receive fax messages
			DETECT	OFF			without pressing the	28
							Mono Fax Start key.
		5.	REMOTE	ON			Enter code to activate or
			CODE	(		51, #51)	deactivate your machine
				(		91, #91 for	from a remote location.	40
				New Zealand)
				OFF
		6.	AUTO	ON			Reduces size of image.	28
			REDUCTION	OFF
		7. MEM.		ON			Automatically stores
			RECEIVE	OFF			any incoming faxes in	29
							its memory if it runs out
							of paper.
		8. POLLING		STANDARD			You call another fax
			RX	SECURE			machine to receive a fax	45
				TIMER			from it.
	2. SETUP	1. CONTRAST		AUTO			Change the lightness or
	SEND			LIGHT			darkness of a fax you are	21
				DARK			sending.
		2. FAX		STANDARD			Changes the default
			RESOLUTION	FINE			setting of fax resolution.	21
				S.FINE
				PHOTO
		3. TIMER				—	Set the machine to send	34
							your documents later.
		4. BATCH TX		ON			Sends all delayed faxes
				OFF			that are to the same fax
							number and at the same	34
							time as one
							transmission.

* The factory setting (option) is shown in bold.

13