Safety and Legal

 

15 This product should be connected to an AC power source within the range indicated on the

 

rating label. Do NOT connect it to a DC power source. If you are not sure, contact a qualified

 

electrician.

A

16 This product is equipped with a 3-wire earthed plug. This plug will fit into only an earthed socket. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete socket. Do not defeat the purpose of an earthed plug.

17Do not place anything on top of the power cord including this machine. Do not allow the power cord to be stepped on.

18Do not place anything in front of the machine that will block received faxes. Do not place anything in the path of received faxes.

19Do not touch a document during printing.

20Never push objects of any kind into this product through cabinet slots, since they may touch dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never spill liquid of any kind on the product.

21Do not attempt to service this product yourself, because opening or removing covers may expose you to dangerous voltage points and/or other risks. Refer all servicing to service personnel.

22Unplug this product from the mains power and telephone line sockets, and refer servicing to qualified Service Personnel under the following conditions:

„If the power cord is damaged or frayed.

„If liquid has been spilled into the product.

„If the product has been exposed to rain or water.

„If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.

„If the product has been dropped or the cabinet has been damaged.

„If the product exhibits a distinct change in performance, indicating a need for service.

23This unit will only work in conjunction with a tone signalling (DTMF) telephone, but some telephones are not compatible. Since noise or speech from the telephone can upset dialling from this unit, errors may result if the devices are used together in other than quiet conditions.

24Where it is necessary to dial prefix digits, such as a Caller Display override code (“0196 ” or “0197 ”), this unit will have to be used in conjunction with an associated tone signalling (DTMF) telephone.

25Note that some telephones are not compatible with this unit and dialling errors may result if the two devices are used together in other than quiet conditions. The Telecom Faults Service is not to be called should such problems arise. In such cases, it is recommended that the prefix and wanted number are dialled manually.

26This equipment may not provide for the effective hand-over of a call to another device connected to the same line.

107