|
| Troubleshooting and Routine Maintenance |
|
|
|
|
|
Error Message | Cause | Action |
|
Unusable Device | A broken device has been | Unplug the device from the USB direct interface, |
|
| connected to the USB direct | then press Power Save to turn the machine off |
|
| interface. | and then on again. |
|
|
|
|
|
Unusable Device | A USB device or USB Flash memory | Unplug the device from the USB direct interface. | B |
Please | drive that is not supported has been |
| |
Disconnect | connected to the USB direct |
|
|
USB Device. | interface. |
|
|
| (For more information, visit us at |
|
|
|
|
| |
|
|
|
|
Wrong Paper | Paper is not the correct size. | Check that the machine’s Paper Size setting |
|
Size |
| matches the size of paper in the tray. (See Paper |
|
|
|
|
If the LCD shows:
Clean Unable XX
Init Unable XX
Print Unable XX
Scan Unable XX
We recommend transferring your faxes to another fax machine. (See Transferring faxes to another fax machine on page 125.)
You can also transfer the Fax Journal report to see if there are any faxes you need to transfer. (See Transferring the Fax Journal report to another fax machine on page 125.)
Note
If there is an error message on the machine's LCD, after the faxes have been transferred, disconnect the machine from the power source for several minutes, and then reconnect it.
If you have not set up your Station ID, you cannot enter fax transfer mode. (See Enter personal information (station ID) in the Quick Setup Guide.)
a Press Menu, 9, 0, 1.
b Do one of the following:
If the LCD shows No Data, there are no faxes left in the machine's memory.
Press Stop/Exit.
If the LCD shows Enter Fax No., enter the fax number to which faxes will be forwarded.
c Press Mono Start.
Transferring the Fax Journal report to another fax machineIf you have not set up your Station ID, you cannot enter fax transfer mode. (See Enter personal information (station ID) in the Quick Setup Guide.)
a Press Menu 9, 0, 2.
b Enter the fax number to which the Fax Journal report will be forwarded.
c Press Mono Start.
125