Mode Timer
The machine has four temporary mode keys on the control panel: Fax, Scan, Copy and Photo Capture. You can change the amount of time the machine takes after the last Scan, Copy or PhotoCapture operation before it returns to Fax mode. If you choose Off, the machine stays in the mode you used last by default.
a Press Menu, 1, 1.
b Press a or b to choose 0 Sec,
30Secs, 1 Min, 2 Mins, 5 Mins or Off.
Press OK.
c Press Stop/Exit.
General setup
Paper settings
Paper TypeTo get the best print quality, set the machine for the type of paper you are using.
a Press Menu, 1, 2. | 3 |
b Press a or b to choose Plain Paper, Inkjet Paper, Brother BP71, Other Glossy or Transparency. Press OK.
c Press Stop/Exit.
Note
The machine ejects paper with printed surfaces face up onto the paper tray in front of the machine. When you use transparencies or glossy paper, remove each sheet at once to prevent smudging or paper jams.
Paper SizeYou can use five sizes of paper for copying: Letter, Legal, A4, A5, and 10 ⋅ 15 cm and three sizes for printing faxes: Letter, Legal and A4. When you change the size of paper you load in the machine, you will need to change the paper size setting at the same time so your machine can fit an incoming fax on the page.
a Press Menu, 1, 3.
b Press a or b to choose Letter, Legal, A4, A5 or 10x15cm.
Press OK.
c Press Stop/Exit.
21