How to load envelopes and post cards

a Before loading, press the corners and sides of envelopes or post cards to make them as flat as possible.

Note

If envelopes or post cards are ‘double-feeding’, put one envelope or post card in the paper tray at a time.

b Put envelopes or post cards into the paper tray with the address side down and the leading edge in first as shown in the illustration. Press and slide the paper side guides (1) and paper length guide (2) to fit the size of the envelopes or post cards.

1

2

Loading paper and documents

If you have problems when printing on envelopes, try the following suggestions:

a Make sure the flap is either to the side of

 

the envelope or to the back edge of the

 

envelope when printing.

2

b Adjust the size and margin in your

 

application.

 

Removing small printouts from the machine

When the machine ejects small paper onto the output paper tray you may not be able to reach it. Make sure printing has finished, and then pull the tray completely out of the machine.

11