Dial Tone detection

When you send a fax automatically, by default your machine will wait for a fixed amount of time before it starts to dial the number. By changing the Dial Tone setting to Detection you can make your machine dial as soon as it detects a dial tone. This setting can save a small amount of time when sending a fax to many different numbers. If you change the setting and start having problems with dialling you should change back to the default No Detection setting.

a Press Menu, 0, 5.

(Menu, 0, 4 for New Zealand.)

b Press a or b to choose Detection or No Detection.

Press OK.

c Press Stop/Exit.

120

Telephone line interference

If you are having problems sending or receiving a fax due to possible interference on the telephone line, we recommend that you adjust the Equalization for compatibility to reduce the modem speed for fax operations.

a Press Menu, 2, 0, 2.

b Press a or bto choose High, Normal or Basic(for VoIP).

„Basic(for VoIP) cuts the modem speed to 9600 bps. Unless interference is a recurring problem on your telephone line, you may prefer to use it only when needed.

„Normal sets the modem speed at 14400 bps.

„High increases the modem speed to 33600 bps. (default)

Press OK.

c Press Stop/Exit.

Note

When you change the compatibility to Basic(for VoIP), the ECM feature is only available for colour fax sending.