Dial your fax number from a touch tone telephone or another fax machine.

Chapter 9

Using your Remote Access Code

a

b When your machine answers, enter your remote access code (3 digits followed by l) at once.

c The machine signals if it has received messages:

„1 long beep — Fax messages

„No beeps — No messages

d When the machine gives two short beeps, enter a command.

The machine will hang up if you wait longer than 30 seconds to enter a command.

The machine will beep three times if you enter an invalid command.

e f

Press 9 0 to stop Remote Access when you have finished.

Hang up.

Note

If your machine is set to Manual mode and you want to use the remote retrieval features, wait about 2 minutes after it starts ringing, and then enter the remote access code within 30 seconds. This function may not be available in some countries e.g. Australia.

62