Troubleshooting and routine maintenance

 

Print quality difficulties

 

 

 

 

 

Difficulties

Suggestions

 

Printed pages are curled.

„ Low quality thin or thick paper or not printing on the recommended side of the

 

 

paper could cause this problem. Try turning over the stack of paper in the

 

 

paper tray.

C

 

„ Make sure that you choose the Paper Type that suits the print media type you

 

 

 

are using. (See Acceptable paper and other print media on page 14.)

 

 

 

 

Printed pages are smeared.

The Paper Type setting may be incorrect for the type of print media you are using,

 

 

or the print media may be too thick or have a rough surface. (See Acceptable

 

 

paper and other print media on page 14 and Basic tab in the Software User’s

 

 

Guide on the CD-ROM.)

 

 

 

 

Printouts are too light.

„ If this problem occurs when making copies or printing received faxes, set

 

 

Toner Save mode to Off in the machine menu settings. (See Toner Save

 

 

on page 25.)

 

 

„ Set Toner Save mode to Off in the Advanced tab in the printer driver. (See

 

 

Advanced tab in the Software User’s Guide on the CD-ROM.)

 

 

 

 

Network difficulties

DifficultiesSuggestions

Cannot print over a wired Network. If you are having Network problems see the Network User's Guide on the CD- ROM for more information.

Make sure your machine is powered on and is on-line and in the Ready mode. Print the Network Configuration list to see your current Network settings. (See How to print a report on page 77.) Reconnect the LAN cable to the hub to verify that the cable and network connections are good. If possible, try connecting the machine to a different port on your hub using a different cable. If the connections are good, the lower LED of the back panel of the machine will be green.

121