Chapter 5

Out of memory message

If you get an Out of Memory message while scanning the first page of a fax, press Stop/Exit to cancel the fax.

If you get an Out of Memory message while scanning a subsequent page, you will have the option to press Start to send the pages scanned so far, or to press Stop/Exit to cancel the operation.

Note

•If you get an Out of Memory message while faxing and you do not want to delete your stored faxes to clear the memory, you can send the fax in real time. (See Real Time Transmission on page 42.)

•To make extra memory available, you can do the following:

•Print the faxes that are in the memory. (See Printing a fax from the memory on page 50.)

•Turn off Fax storage. (See Turning off Remote Fax Options on page 69.)

•Add Optional Memory (See Memory board on page 113.)

Maximum ADF output tray capacity

If the maximum capacity of the output tray is reached during use, the machine will stop scanning and the LCD will show

20Sheet Limit.

Do one of the following:

„To send the pages scanned so far, press

1.Send.

„To delete the scanned pages, press

2.Delete.

If you send the pages already scanned and want to send the remaining pages, remove the scanned sheets from the ADF output tray, then dial the fax number and press Start.

44