External and extension telephones
Note
You need to turn the Remote Codes setting to on to use the Remote Activation Code l51 (l91 for New Zealand) and Remote Deactivation Code #51 (#91 for New Zealand). (See Using Remote Codes on page 60.)
Operating from external and extension telephonesTelephone and external devices
For Fax/Tel mode onlyWhen the machine is in Fax/Tel mode, it will use the F/T Ring Time (pseudo/double- ringing) to alert you to pick up a voice call.
Lift the external telephone’s handset, and then press Hook to answer.
If you are at an extension telephone, you will need to lift the handset during the F/T Ring Time and then press #51 (#91 for New Zealand) between the pseudo/double rings. If no one is on the line, or if someone wants to send you a fax, send the call back to the machine by pressing l51(l91 for New Zealand).
If you answer a fax call at an extension telephone, or an external telephone that is correctly connected to the machine into the correct socket on the machine, you can make
7
your machine take the call by using the Remote Activation code. When you press the Remote Activation code l51 (l91 for New Zealand) the machine starts to receive the fax.
If you answer a call and no one is on the line:You should assume that you’re receiving a manual fax.
Press l51 (l91 for New Zealand) and wait for the chirp or until the LCD shows Receiving, and then hang up.
Note
You can also use the Fax Detect feature to make your machine take the call. (See Fax Detect on page 48.)
You can connect a separate telephone directly to your machine as shown in the diagram below.
1
2
(Example
for 3 Australia)
1Extension telephone
2External telephone
3Protective Cap
When you are using an external telephone, the LCD shows Telephone.
59