Difficulties | Suggestions |
The network scanning feature | (Windows®) The firewall setting on your PC may be rejecting the necessary |
does not work. | network connection. Follow the instructions below to configure Windows® |
The network PC Fax Receive | Firewall. If you are using other personal firewall software, see the User’s Guide |
feature does not work. | for your software or contact the software manufacturer. |
The network printing feature does | (Windows® XP SP2) |
not work. | a Click the Start button, Control Panel, |
| |
| Network and Internet Connections and then Windows Firewall. Make |
| sure that Windows Firewall on the General tab is set to On. |
| b Click the Advanced tab and Settings... button of the |
| Network Connection Settings. |
c Click the Add button.
d To add port 54925 for network scanning, enter the information below:
1.In Description of service: Enter any description, for example “Brother Scanner”.
2.In Name or IP address (for example 192.168.0.12) of the computer hosting this service on your network: Enter “Localhost”.
3.In External Port number for this service: Enter “54925”.
4.In Internal Port number for this service: Enter “54925”.
5.Make sure UDP is chosen.
6.Click OK.
e Click the Add button.
f To add port 54926 for network PC Fax, enter the information below:
1.In Description of service: Enter any description, for example “Brother PC Fax”.
2.In Name or IP address (for example 192.168.0.12) of the computer hosting this service on your network: Enter “Localhost”.
3.In External Port number for this service: Enter “54926”.
4.In Internal Port number for this service: Enter “54926”.
5.Make sure UDP is chosen.
6.Click OK.
g If you still have trouble with your network connection, click the Add button.
h To add port 137 for network scanning, network printing and network PC Fax receiving, enter the information below:
1.In Description of service: - Enter any description, for example “Brother PC Fax receiving”
2.In Name or IP address (for example 192.168.0.12) of the computer hosting this service on your network: Enter “Localhost”.
3.In External Port number for this service: Enter “137”.
4.In Internal Port number for this service: Enter “137”.
5.Make sure UDP is chosen.
6.Click OK.
iMake sure if the new setting is added and is checked, and then click OK.
122