h Put the next page on the scanner glass. Press OK.
Repeat steps gand hfor each page of the layout.
i After all the pages have been scanned, press 2 in step g to finish.
Place the document face down in the direction shown below:2 in 1 (P)2 in 1 (L)4 in 1 (P)4 in 1 (L)Making copies
Tray selectionYou can change the Tray Use only for the next copy.
a Make sure you are in Copy mode . b Load your document.
c Use the dial pad to enter the number of copies (up to 99).
d Press Options.
Press a or b to choose Tray Select. Press OK.
e Press a or b to choose the MP>T1>T2, T1>T2>MP, #1(XXX), #2(XXX) or MP(XXX).
Press OK.
f Press Start.
Note
•T2 or #2 appears only if the optional paper tray is installed.
•T2 or #2 is available for
•To change the default setting for Tray Select, see Tray Use in copy mode on page 22.
12
85