![](/images/backgrounds/163337/163337-21536x1.png)
Chapter 3
LCD Contrast
You can change the contrast to make the LCD look lighter or darker.
a Press Menu, 1, 7.
b Press b to make the LCD lighter. Or, press a to make the LCD darker. Press OK.
c Press Stop/Exit.
Dial prefix
The dial prefix setting will automatically dial a predefined number before every fax number you dial. For example: If your telephone system requires a 9 to dial an outside number use this setting to automatically dial 9 for every fax you send.
Setting up the prefix numbera (for New Zealand) Press Menu, 0, 5. Press Menu, 0, 6.
b Enter the prefix number (up to 5 digits) on the dial pad.
Press OK.
Note
•You can use the numbers 0 to 9, #, l and !. (Press Hook to display “!”.)
You cannot use ! with any other numbers or characters.
If your telephone system requires a timed break recall (hookflash), press Hook to enter the break.
•(Not available in New Zealand) If the pulse dialing mode is on, # and l are not available to use.
c Press Stop/Exit.
a (for New Zealand) Press Menu, 0, 5. Press Menu, 0, 6.
b Do one of the following:
To change the prefix number, press 1.
To exit without making a change, press 2 and go to d.
c Enter a new prefix number using the dial pad (up to 5 digits).
Press OK.
d Press Stop/Exit. 26