If you want to use a printed cover page that you can write on, you can print the sample page and attach it to your fax.
a Make sure you are in Fax mode . b Press Menu, 2, 2, 7.
c Press a or b to choose Print Sample. Press OK.
d
e After the machine prints a copy of your cover page, press Stop/Exit.
ContrastFor most documents the default setting of Auto will give the best results. It automatically chooses the suitable contrast for your document.
If your document is very light or dark, changing the contrast may improve the quality of the fax.
Use Dark to make the faxed document lighter.
Use Light to make the faxed document darker.
a Make sure you are in Fax mode . b Load your document.
c Press Menu, 2, 2, 1.
d Press a or b to choose Auto, Light or
Dark. Press OK.
Note
Even if you choose Light or Dark, the machine will send the fax using the Auto setting if you choose Photo as the Fax Resolution.
Sending a fax
Changing Fax ResolutionThe quality of a fax can be improved by changing the Fax Resolution. Resolution can be changed for the next fax or for all faxes.
To change the Fax Resolution setting for the next faxa Make sure you are in Fax mode . b Load your document.
c Press Resolution, then a or b to choose
the resolution.5 Press OK.
To change the default Fax Resolution settinga Make sure you are in Fax mode . b Press Menu, 2, 2, 2.
c Press a or b to choose the resolution you want.
Press OK.
Note
•You can choose four different resolution settings.
Standard: Suitable for most typed documents.
Fine: Good for small print and transmits a little slower than Standard resolution.
S.Fine: Good for small print or artwork and transmits slower than Fine resolution.
Photo: Use when the document has varying shades of grey or is a photograph. This has the slowest transmission time.
•The time taken to send will increase when choosing S.Fine or Photo.
41