the user to manually control the firing rate while the boiler is firing. The third option can be selected to change the rpm of the blower while the boiler is off or in standby. The manual firing rate can be changed by pressing the clear button and entering the new value or by using the up and down arrows. To accept the new value press the ok button and the boiler will change the firing rate to the new value. An error message will display if the value entered exceeds the maximum firing rate or falls below the minimum firing rate.
Note:
The firing rate control should come from the factory set to ‘Manual in Run’ with the manual firing rate value set to the light off rpm.
2.2.15ADVANCED SETUP
► 1234 SETUP ►ADVANCED SETUP
Figure 29 Advanced Setup
The advanced setup page displays many more options that can be changed by the user.
Date: 8-4-2010
Revision: 0
Form: 2396
2.2.16SYSTEM TIME
► 1234 SETUP ► ADVANCED
SETUP ► DATE & TIME
Figure 30 System Time
Set the date and time by adjusting the appropriate boxes using the up and down arrow keys. Select the OK button when finished.
Note:
Currently the date and time will need to be reset when a loss of power to the display occurs.
2.2.17CALIBRATE TOUCH SCREEN
► 1234 SETUP ► ADVANCED
SETUP ► DIAGNOSTICS
Figure 31 Display Diagnostics
Occasionally the touch screen will need to be
24
