Cabletron Systems 2H28-08R manual Shows which ports are currently set as source ports

Chapter 5: Local Management

To access the Port Redirect Function screen from the Device Specific Configuration Menu screen, use the arrow keys to highlight the PORT REDIRECT FUNCTION menu item and press ENTER. The Port Redirect Function screen displays.

Event Message Line
		2H28-08R LOCAL MANAGEMENT
		Port Redirect Function
Device Type: 2H28-08R				Firmware Revision:		XX.XX.XX
				BOOTPROM Revision: XX.XX.XX
	Source Port:	Destination Port:			Remap Errors
	-----------------	----------------------			-------------------
	1	2			ON
	1	3			OFF
	1	4			ON
	1	1			ON
	2	3			ON
	2	4			ON
	3	5			ON
	3	6			ON
Source Port [1]		Destination Port [1]	Errors	[ON]	Status	[ADD]
							RETURN
SAVE	PREVIOUS	NEXT			EXIT		RETURN

2286-22

Figure 5-21 Port Redirect Function Screen

The following definitions briefly explain each field of the Port Redirect Function screen:

Source Port (Read-only)

Shows which ports are currently set as source ports.

Destination Port (Read-only)

Shows which ports are currently set as destination ports.

Remap Errors (Read-only)

This field shows the current state of the Remap Error setting for the specific port.

5-54 2H28-08R SmartSwitch 2208 User’s Guide