Cabletron Systems 2H28-08R manual Accessing Local Management, Usa

Chapter 5: Local Management

5.4ACCESSING LOCAL MANAGEMENT

Access to Local Management is controlled through the Local Management Password screen shown in Figure 5-3. Whenever a connection is made to the 2H28-08R, the Local Management Password screen displays. Before continuing, the user must enter a password (community name) which is compared to the previously stored passwords. The level of access allowed the user depends on the password. To set or change passwords, refer to Section 5.8. The following steps describe the procedure to access Local Management.

1.Turn on the terminal. Press ENTER (up to four times may be needed to engage the autobaud capability) until the 2H28-08R Local Management Password screen displays.

2H28-08R LOCAL MANAGEMENT

CABLETRON Systems, Incorporated

P.O.Box 5005
Rochester, NH 03866-5005	USA

(603)332-9400

(c)Copyright CABLETRON Systems, Inc. 1997

Module Serial Number:

Module Hardware Revision:

Module Firmware Revision: XX.XX.XX

Module BOOTPROM Revision: XX.XX.XX

Enter Password:

Event Message Line

Figure 5-3 Local Management Password Screen

2.Enter the Password and press ENTER. The default super-user access password is “public” or press ENTER.

5-8 2H28-08R SmartSwitch 2208 User’s Guide