Chapter 5: Local Management
If the date entered is a valid format, the message displays “SAVED OK” at the top of the screen. If the entry is not valid, Local Management does not alter the current value, but it refreshes the Device Date field with the previous value.
5.7.6Setting the Device Time
To set the device time, perform the following steps:
1.Use the arrow keys to highlight the Device Time field.
2.Enter the time in this
NOTE |
When entering the time in the Device Time field, separators between hours, minutes, and seconds are not needed as long as each entry uses two numeric characters. For example, to set the time to 6:45 P.M., type “184500” in the Device Time field.
3.Press ENTER to set the system clock to the time in the input field.
4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.
If the time entered is a valid format, the message displays “SAVED OK” at the top of the screen. If the entry is not valid, Local Management does not alter the current value and refreshes the Device Time field with the previous value.
5.7.7Entering a New Screen Refresh Time
The screen refresh time is set from 3 to 99 seconds with a default of 3 seconds. To set a new screen refresh time, perform the following steps:
1.Use the arrow keys to highlight the Screen Refresh Time field.
2.Enter a number from 3 to 99.
NOTE |
If the entry is not valid, when you hit ENTER or try to exit the field using the arrow keys, the message “Permissible Range: 3...99” displays momentarily and the field refreshes with the previous value.
|
