Chapter 5: Local Management

Using the RETURN Command

To exit LM using the RETURN command, proceed as follows:

1.Use the arrow keys to highlight the RETURN command at the bottom of the Local Management screen.

2.Press ENTER. The previous screen in the Local Management hierarchy displays.

NOTE

The user can also exit Local Management screens by pressing ESC twice. This exit method does not warn about unsaved changes and all unsaved changes are lost.

3.Exit from 2H28-08R Local Management by repeating steps 1 and 2 until the Device Menu screen displays.

4.To end the LM session, use the arrow keys to highlight the RETURN command at the bottom of the Device Menu screen.

5.Press ENTER. The Local Management Password screen displays and the session ends. If in a Telnet session, the session ends without returning to the Local Management Password screen.

5-12

2H28-08R SmartSwitch 2208 User’s Guide

Page 60
Image 60
Cabletron Systems 2H28-08R manual Using the Return Command