Cabletron Systems 2H28-08R manual Installing Optional Fast Ethernet Interface Modules

Appendix C: Optional Installations and Mode Switch Bank Settings

C.3 INSTALLING OPTIONAL FAST ETHERNET INTERFACE MODULES

Figure C-3shows the locations of the Fast Ethernet Interface Module connectors for ports 7 and 8.

TOP VIEW WITHOUT COVER

Primary

Power

Supply

Redundant

Power

Supply

FRONT PANEL

Connectors

Optional Fast Ethernet Interface Modules

Figure C-3 Fast Ethernet Interface Module Connector Location

To install a Fast Ethernet Interface Module in port slot 7 or 8, proceed as follows:

The FE-100F3 uses Class 1 lasers. Do not use optical

!instruments to view the laser output. The use of optical

CAUTION	instruments to view laser output increases eye hazard. When
	viewing the output optical port, power must be removed from
	the network adapter.

!

CAUTION

The Fast Ethernet Interface Module and the 2H28-08R are sensitive to static discharges. Use an antistatic wrist strap and observe all static precautions during this procedure. Failure to do so could damage the module or the 2H28-08R.

C-6 2H28-08R SmartSwitch 2208 User’s Guide