Cabletron Systems 3Com manual Ceiling Mount To mount an AP on a ceiling

30CHAPTER 2: INSTALLING ACCESS POINT HARDWARE

Ceiling Mount To mount an AP on a ceiling:

1Attach the mounting bracket to the AP by lining up the raised flanges in the center of the bracket with the mounting holes on the bottom of the AP.

2Firmly press the rounded ends of the flanges into both mounting holes, and then push forward until the flanges slide into the holes and the bracket locks into place.

3Attach both t-rail grips to the outer flanges of the mounting bracket with the t-rail wingnuts. Do not tighten the wingnuts completely; the t-rail grips should remain loose.

4Align the t-rail grips with the ceiling t-rails, and attach them to the t-rails.

5Tighten the t-rail wingnuts.