Chapter 4: Examples

6.The switch examines its VLAN configuration information and determines that the frame for Red VLAN is allowed to be forwarded out Port 1 and that it must be sent in an untagged format.

7.The switch forwards the frame out Port 1. Any other unicast transmissions between stations R1 and R2 will be handled identically.

4.2EXAMPLE 2, VLANS ACROSS MULTIPLE SWITCHES

This second example investigates the steps that must be taken to set up VLANs across multiple 802.1Q VLAN switches. This includes the configuration and operation of 1Q Trunks between 802.1Q VLAN switches.

As shown in Figure 4-3, two companies, “Redco” and “Blue Industries”, share floors 2 and 4 in a building where the network infrastructure is supplied by the building owner. The objective is to completely isolate the network traffic of the two companies by limiting the user’s traffic through the ports of two switches, thus maintaining security and shielding the network traffic from each company. This example will show the use and configuration of a 1Q Trunk connection and the creation of VLANs across multiple switches.

4-4

802.1Q VLAN User’s Guide

Page 70
Image 70
Cabletron Systems 802.1Q manual Example 2, Vlans Across Multiple Switches