Chapter 4: Examples
Switch 4
Switch 4 is set as follows:
1.Two VLANs are added to the list of VLANs in the Device/VLAN Configuration screen and assigned to a FID. In this example they are as follows:
•VLAN ID 2, FID 2, with a VLAN Name of Red
•VLAN ID 3, FID 3, with a VLAN Name of Blue
Because the VLANs are assigned to two separate FIDs, the users on VLAN ID 2 and VLAN ID 3 cannot communicate with each other.
2.Ports 1 and 3 are assigned to the Port VLAN ID (PVID) as follows using the Port Assignment Configuration screen:
•Port 1, VLAN ID: 2 for the Red VLAN
•Port 3, VLAN ID: 3 for the Blue VLAN
This causes the switch to classify all untagged frames received as belonging to the VLAN specified by each port PVID and to replace the previous PVID information in the port VLAN List with the new PVID information. This makes Port 1 part of the Red VLAN, Port 3 part of the Blue VLAN, and both are set as VLAN frame format of untagged.
3.Port 4 is configured as a 1Q Trunk port as follows using the Port Assignment Configuration screen:
•Port Mode: 1Q Trunk
Port 4 is set as an 802.1Q Trunk port, which makes the port eligible to transmit to all VLANs, and all frames forwarded out this port are forwarded as tagged frames. By default there is no PVID associated with the trunk port and the port remains as a member of the Default VLAN. With the original classification information inserted in the frame Tag Header, the receiving switch will maintain the original frame classification.
802.1Q VLAN User’s Guide |
