Message (Error code)

Cause

 

Action

Details

 

 

 

 

 

 

 

 

INSERT PHOTO CARD

 

There is no memory card in the

If you want to use the photo print

p. 4-2

 

 

 

memory card slot.

function, insert a memory card into

 

 

 

 

 

 

 

 

the appropriate slot.

 

 

 

 

 

 

 

 

 

INVALID KEY/SETTING

 

An invalid key was pressed or an

Check the key or setting you want to

 

 

 

 

invalid setting was selected.

enter.

 

 

 

 

 

 

 

 

 

LOAD PAPER

The multi-purpose tray is empty.

Load paper in the multi-purpose tray.

p. 3-7

 

(PRESS START KEY)

 

 

 

 

Make sure the stack is below the

 

 

 

 

 

 

 

 

paper limit mark (s) and tab. Then

 

 

 

 

 

 

 

 

press [Start] or [Resume].

 

 

 

 

 

 

 

 

 

M INK EMPTY

 

The magenta ink tank in the

Replace the ink tank.

p. 11-2

 

 

 

 

printhead is empty.

 

 

 

 

 

 

 

 

 

 

MACHINE IN USE

 

You are unable to turn the

Wait until the machine has finished,

 

 

CANNOT TURN OFF

 

machine off with the [ON/OFF

then turn off the machine.

 

 

 

 

 

(1sec.)] key because the machine

 

 

 

 

 

 

is performing an operation.

 

 

 

 

 

 

 

 

 

 

MEMORY FULL

 

The machine’s memory is full

Divide the document and send or

p. 8-8

(#037)

 

 

because you tried to send or

copy each part separately. To free up

 

 

 

 

 

copy too many pages at once, or

space in the machine’s memory, print

 

 

 

 

 

a very long or detailed

or delete any documents in memory

 

 

 

 

 

document.

you no longer need.

 

 

 

 

 

 

 

 

 

 

 

 

 

In photo print mode, the

Print the photograph from your

 

 

 

 

 

photograph data is too large to

computer.

 

 

 

 

 

print from your machine.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fax Model

 

The machine’s memory

Print any documents stored in

p. 8-8

 

 

 

 

is full because it has received too

memory. Then start again.

 

 

 

 

 

many documents, or a very long

 

 

 

 

 

 

or detailed document.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fax Model

 

In photo print mode,

Print or delete any documents in

p. 8-8

 

 

 

 

you tried to print photographs

memory, or wait for the machine to

 

 

 

 

 

when the machine’s memory

send any documents stored in

 

 

 

 

 

was full.

 

memory. Then try printing

 

 

 

 

 

 

 

 

photographs again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fax Model

MEMORY

 

Shows the percentage of

If you need more space, wait for the

p. 8-8

 

USED nn %

 

memory currently in use.

machine to send any faxes. Also, print

 

 

 

 

 

 

 

 

or delete any documents in memory

 

 

 

 

 

 

 

 

you no longer need.

 

 

 

 

 

 

 

 

 

NO FILES ON CARD

 

There are no available files in the

Make sure you have recorded

 

 

 

 

 

memory card.

photographs in the appropriate

 

 

 

 

 

 

 

 

format on the memory card.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fax Model

NO RX PAPER

 

The other party’s fax machine is

Contact the other party and have

 

(#012)

 

 

out of paper or its memory is full.

them load paper in their fax machine

 

 

 

 

 

 

 

 

or free up space in their fax machine’s

 

 

 

 

 

 

 

 

memory.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fax Model

NO TEL #

 

The one-touch speed dialing key

Register the one-touch speed dialing

Chapter 7

(#022)

 

 

or coded speed dialing code you

key or coded speed dialing code.

 

 

 

 

 

entered has not been registered.

 

 

 

 

 

 

 

 

 

 

 

12

Troubleshooting

Chapter 12

Troubleshooting 12-21

Page 130
Image 130
Canon MultiPASS MP730, 730i, MP700 manual Load Paper, Machine in USE, Memory Full, No Files on Card, No TEL #