Do not store or display printouts in hot, damp, or humid conditions. Never expose them to heat or direct sunlight.

Store printouts in photo albums, photo frames, or presentation binders to protect them from direct exposure to air or sunlight.

Do not mount printouts in an adhesive-type album as you may not be able to remove them.

Be aware that some types of clear plastic folders and albums may cause the edges of the paper to turn yellow.

Setting the paper thickness lever

The paper thickness lever adjusts the gap between the printhead and the print media to suit the print media’s thickness. Before printing, be sure to set the paper thickness lever.

Follow this procedure to set the paper thickness lever:

1Press [Open] q and lift up the scanning unit w.

The printhead holder automatically moves to the center of the machine.

CAUTION

Do not try to manually move or stop the printhead holder.

Do not touch any metal parts.

2Move the paper thickness lever to the appropriate setting.

For details on which position to set for the print media you are using, see pp. 3-1 to 3-4.

w

q

3

Print media handling

3Close the scanning unit until it locks into place.

Chapter 3

Print media handling

3-5

Page 30
Image 30
Canon 730i, MultiPASS MP730, MP700 manual Setting the paper thickness lever, Press Open q and lift up the scanning unit w