Canon MP700, 730i Receiving faxes manually MANUAL MODE, Press Set 13 Press Stop/Reset

10Press [Set].

DRPD:SELECT FAX

DOUBLE RING

11Use [2] or [3] to select the ring pattern that your telephone company assigned to your fax number.

•Select from the following:

–<DOUBLE RING>

–<SHORT-SHORT-LONG>

–<SHORT-LONG-SHORT>

–<OTHER RING TYPE>

–<NORMAL RING>

12Press [Set].

13Press [Stop/Reset].

Receiving faxes manually: MANUAL MODE

Choose this mode if:

•you only have one telephone line for both fax and telephone use.

•you receive mainly voice calls and sometimes faxes.

You will need to:

• set <MANUAL MODE> ( p. 9-1).

• connect a telephone to your machine ( Set-Up Sheet).

When you receive a fax call: The machine will ring. Pick up the handset and if you hear a beep, press [Start] on the machine to receive the fax. If you are far from your machine, dial 25 (the remote receiving ID) on your telephone and hang up.

When you receive a voice call: The machine will ring. Pick up the handset to answer the call.

NOTE

• You can customize remote receiving by enabling/disabling it, or by changing the remote receiving ID ( <REMOTE RX>, p. 13-5).

•If you have an answering machine connected to your machine that can carry out remote-control operations (controlling your answering machine from a remote telephone), the security code for this function may be the same as the remote receiving ID. If so, make sure you change the machine’s remote

receiving ID to make it distinct from the answering machine’s security code ( <REMOTE RX ID>, p. 13-5).

9

Receiving faxes

Chapter 9 Receiving faxes 9-5