Canon MP700 Adjusting the image quality resolution, Adjusting the exposure density, Press Set

Adjusting the image quality (resolution)

Refer to Making copies on p. 5-1 and in step 4, adjust the image quality as follows:

1

2

Press [Image Quality].

Use [2] or [3] to select the image quality.

•In black & white mode, select:

–<B&W TEXT> for text-only documents.

–<B&W PHOTO> for photographs.

–<B&W DRAFT> for high-speed copying at a lower resolution.*

•In color mode, select:

–<COLOR NORMAL> for color text-only documents.**

–<COLOR FINE> for color photographs.

–<COLOR FAST> for high-speed color copying at a lower resolution.*

3Press [Set].

NOTE

•When using <COLOR FAST>, if the color output is different from that expected, select <COLOR NORMAL> or <COLOR FINE> and try copying again.

Adjusting the exposure (density)

Exposure (density) is the degree of difference between light and dark. A high exposure setting will make blacks darker and whites brighter, whereas a low exposure setting will make the differences between black and white less marked.

Refer to Making copies on p. 5-1 and in step 4, adjust the exposure as follows:

1Press [Exposure].

2Use [2] or [3] to select the exposure.

3Press [Set].

* This setting is only available when <PLAIN> is selected as the print media type ( p. 3-6).

** This setting is not available when <GLOSSY> or <PHOTO> is selected as the print media type ( p. 3-6).

5-2 Copying Chapter 5