Manuals / Canon / Computer Equipment / All in One Printer

Canon MP700, 730i, MultiPASS MP730 manual Safety information, Location

Models: MP700 MultiPASS MP730 730i

1 155

Download 155 pages 46.57 Kb

Page 8

Safety information

Safety information

Read this safety information thoroughly before using your machine, and keep it handy in case you need to refer to it later.

WARNING

•This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your doctor.

CAUTION

•Do not disassemble or modify. There are high-temperature and high-voltage components inside the machine which may result in fire or electrical shock.

•Follow all warnings and instructions marked on the machine.

Location

WARNING

• Do not place the machine near alcohol, paint thinner, or other flammable substances. If flammable substances come into contact with electrical parts inside the machine, it may result in fire or electrical shock.

CAUTION

•Do not place the machine on top of a carpet or rug which has long pile. The threads may get inside the machine and cause a fire.

•Place the machine on a flat, stable, vibration-free

surface that is strong enough to support its weight. (For the weight of the machine, see the Appendix.)

• Do not place objects around the power plug so that you are able to readily disconnect the power plug from the wall socket at any time. Otherwise you will be unable to disconnect the power plug in case of an emergency.

• Make sure the area is free from dust.

• Make sure the location is not affected by extreme temperature changes, and always stays between 59° and 81.5°F (15° and 27.5°C).

• Make sure the relative humidity of the area is between 20% and 80%.

• Keep the machine away from direct sunlight.

• Do not use or store the machine outdoors.

•Do not install the machine near devices that contain magnets or generate magnetic fields, such as speakers.

Preface

VII

Image 8

Canon MP700, 730i, MultiPASS MP730 manual Safety information, Location

Contents

User’s Guide Preface Preface CopyrightTrademarks How to use the documentation provided Set-Up SheetPrinted manual Quick Reference Guide Users Guide This guideType conventions injury to persons if not performed correctly. In order to use themachine safely, always pay attention to these warnings use the machine safely, always pay attention to these cautionsContents 1 Introduction2 Document handling 3 Print media handling11 Maintenance 12 Troubleshooting13 Machine settings 9 Fax Model Receiving faxesSafety information LocationPower Supply VIIIin fire HandlingFax Model Do not plug the machine into the same circuit as Maintenance Pre-installation requirements for Canon facsimile equipment C. Power requirementsLegal limitation on usage of your product and the use of images Users in the U.S.AConnection of the equipment In case of equipment malfunctionRights of the telephone company FCC NoticeUsers in Canada XIIIPre-installation requirements for Canon facsimile equipment A. LocationC. Power requirements The power outlet should be a three-prong grounded receptacle Single or Duplex. It should be independent from copiers, heaters, air conditioners or any electric equipment that is thermostatically controlled. The rated value is 120 volts and 15 amperes. The RJ11-C modular jack should be relatively close to the power outlet to facilitate installationCANON CANADA INC 1-800-OK-CANON 24 HOURS A DAY, SEVEN DAYS A WEEK PrefacePreface Chapter 1 IntroductionWhat your machine can do Unpacking your machine Main components of the machine Operation panel of the machine e Alarm lightq Resume key w Fax Model In Use/Memory light4Scan key 5Photo Print key6Numeric keys @2Fax Model Redial/Pause keyIntroduction Chapter2 Document handling Document requirementsWeight Problem documentsUsing the platen glass Fax Model Using the ADFLoading documents 1 Lift the document cover 2 Place your document face down on the3 Print media handling Recommended print media and requirementsPlain Paper EnvelopesHigh Resolution Paper HR-101N Glossy Photo Paper GP-301/GP-301NMatte Photo Paper MP-101 Photo Paper Plus Glossy PP-101Photo Paper Pro PR-101 Photo Paper Pro PC-101STransparencies CF-102 Printer driver setting Media Type Photo Paper ProGeneral print media guidelines T-Shirt Transfers TR-201Printer driver setting Media Type T-Shirt Transfer Quantity 1 sheet Paper thickness lever position RightSetting the paper thickness lever 2 Move the paper thickness lever to the appropriate setting1 Press Open q and lift up the scanning unit w 3 Close the scanning unit until it locks into placeSetting the print media size and type 1 Press Copy or Fax Model Fax 2 Press Paper Select3 Use 2 or 3 to select the print media size 4 Press SetLoading print media Loading paperLoading envelopes guide A and adjust to the width of the stackpaper guide A and adjust to the width of 4 Place the stack of envelopes print side upin the multi-purpose tray q. Pinch the the stack wLoading banner paper adjust the paper guide to the width of theMake sure the paper thickness lever is set to the rightChapter 3-10Print media handling 4 Photo printing from a memory card Compatible memory cardsRecommended print media ChapterInserting/removing a memory card Inserting a memory card1 Make sure the machine is on 2 Insert a memory card into the appropriate slotRemoving a memory card 2 Remove the memory cardStep Printing methodsSelect a printing method StepPrinting an index 1 Load the correct print media in the multi-purpose tray2 Insert the memory card as described on p 3 Press Photo Print 4 Press Menu 5 Press SetPrinting all frames 10 Use 2 or 3 to select the print media type11 Press Set 12 Press Start8 Use 2 or 3 to select the print media size 9 Press Set10 Use 2 or 3 to select the print media type If you selected PLAIN PAPER in step 11 Go to stepPrinting a single frame 1 Load the correct print media in the multi-purpose trayInsert the memory card as described on p Press Photo Print Press Menu Press Set12 Use 2 or 3 to select the print media size 13 Press Set14 Use 2 or 3 to select the print media type If you selected PLAIN PAPER in step 15 Go to stepPrinting a range of frames 4-101 Load the correct print media in the multi-purpose tray 2 Insert the memory card as described on p 3 Press Photo Print4-11 12 Use 2 or 3 to select the print media size13 Press Set 14 Use 2 or 3 to select the print media typeChapter 4-13 7 Press Set8 Use 2 or 3 to select the print media type If you selected PLAIN PAPER in step 9 Go to stepSetting vivid photo printing Setting date printing4-14 Press Photo Print Press Menu Use 2 or 3 to select VIVID PHOTO PRINTReading data from or writing data to a memory card Enabling/disabling overwriting memory card data4-15 5 Use 2 or 3 to select SYSTEM SETTINGS 6 Press Set4-16 10 Press Set 11 Press Stop/Reset to return to standby mode8 Press Set 13 Insert a memory card into the appropriate slotSetting color or black & white copying 5 CopyingDocuments you can copy Making copiesAdjusting the image quality resolution Adjusting the exposure densityPress Image Quality Use 2 or 3 to select the image quality 3 Press SetUsing preset copy ratios Using custom copy ratiosReducing or enlarging a copy Copying an image to fit the pageAdvanced copy features Copying two pages on a single page4 Adjust any necessary settings for your document step 4, p 1 Load the document on the platen glass or Fax Model ADF 2 Press CopyBorderless copying 4 Adjust any necessary settings for your document step 4, p1 Load the document on the platen glass 2 Press Copy 3 Use the numeric keys to enter the number of copiesRepeating an image on a page 9 Press StartPreparing your image to repeat it manually 1 Set the print media size you will be copying on to p4 Adjust any necessary settings for your document step 4, p Copying your image1 Load the document on the platen glass or Fax Model ADF 2 Press Copy 3 Use the numeric keys to enter the number of copiesCreating a mirror image Load the document on the platen glass or ADF. Press CopyUse the numeric keys to enter the number of copies Press SetShrinking an image to fit the page 4 Adjust any necessary settings for your document step 4, p1 Load the document on the platen glass or Fax Model ADF 2 Press Copy 3 Use the numeric keys to enter the number of copiesChapter 5-10Copying Guidelines for entering numbers, letters, and symbols 1 Press T to switch to letter mode A or number mode6 Registering information in your machine ChapterRegistering required sender information THE SLEREXE COMPANY LIMITEDEntering the sender information 4 Use 2 or 3 to select FAX SETTINGS 5 Press Set three times13 Press Set 14 Press Stop/Reset 1 Press Menu 2 Use 2 or 3 to select USER DATA 3 Press SetSetting the telephone line type Use 2 or 3 to select FAX SETTINGS Press Set twicePress Set Press Stop/Reset Press Menu Use 2 or 3 to select USER DATA Press SetSetting daylight saving 5 Use 2 or 3 to select SYSTEM SETTINGS 6 Press Set11 Use 2 or 3 to select the month when daylight saving starts 13 Use 2 or 3 to select the week when daylight saving startsUse 2 or 3 to select the day when daylight saving starts Use 2 or 3 to select the month when daylight saving ends21 Use 2 or 3 to select the week when daylight saving ends Use 2 or 3 to select the day when daylight saving ends7 Speed dialing Speed dialing methodsChapter One-touch speed dialingRegistering one-touch speed dialing or Press Stop/Reset to return to standby modePress Menu Use 2 or 3 to select USER DATA Press Set three times 4 Use 2 or 3 to select a one-touch speed dialing key 01 toChanging or deleting an entry Registering coded speed dialing 1 Press Menu 2 Use 2 or 3 to select USER DATA 3 Press Set twice4 Use 2 or 3 to select CODED SPEED DIAL 5 Press Set 6 Use 2 or 3 to select a coded speed dialing code 00 toChanging or deleting an entry Registering group dialing Press Menu Use 2 or 3 to select USER DATA Press Set twiceUse 2 or 3 to select GROUP DIAL Press Set To register a group under a coded speed dialing code11 Press Set Press Stop/Reset to return to standby modeChanging or deleting an entry Coded speed dialing Using speed dialingOne-touch speed dialing Printing speed dialing lists 1 Press Fax 2 Press Menu 3 Use 2 or 3 to select REPORTS/LISTS4 Press Set 5 Use 2 or 3 to select SPEED DIAL LIST 6 Press SetChapter 7-10Speed dialing 8 Sending faxes Documents you can faxSending methods Memory sendingManual sending Press Fax Adjust any necessary settings for your documentTo cancel manual sending Press Stop/Reset sending a document Set-Up Sheet 2 Load the document in the ADFSetting color or black & white transmission Adjusting the image quality fax resolutionImproving faxed images 1 Press Image Quality 2 Use 2 or 3 to select the resolutionAdjusting the scan exposure Dialing methodsPress Exposure Use 2 or 3 to select the exposure Press Set Regular dialingCustomizing automatic redialing settings Redialing a busy numberManual redialing Automatic redialingIf you selected OFF in step 11 Press Set 12 Press Stop/Reset 15 Press Set 16 Press Stop/ResetUse 2 or 3 to select AUTO REDIAL Press Set If you selected ON in step 11 Press Set twice2 Press Fax 3 Adjust any necessary settings for your document 1 Load the document on the platen glass or ADF4 Enter the fax numbers you want to send to One-touch speed dialing Press the one-touch speed dialing keysDocuments stored in memory Printing a list of documents in memoryPrinting or deleting a document in memory Press Fax Press Menu Use 2 or 3 to select MEMORY REFERENCEChecking a document’s details or Press Stop/Reset to return to standby modeIf deleting a document, press T A Transaction number TX/RX NODialing through a switchboard Switching temporarily to tone dialingSpecial dialing 8-10Setting the receive mode 9 Receiving faxesChapter 1 Press Fax 2 Press Menu 3 Press SetReceiving both faxes and voice calls automatically FAX/TEL AUTO SW Customizing FAX/TEL AUTO SW4 Use 2 or 3 to select FAX SETTINGS 5 Press Set 6 Use 2 or 3 to select RX SETTINGS 7 Press SetReceiving faxes automatically FAX ONLY MODE 15 Press Set 16 Press Stop/Reset11 Press Set twice 13 Press Set twiceReceiving with a DRPD Distinctive Ring Pattern Detection service DRPD Setting the ring pattern5 Use 2 or 3 to select FAX SETTINGS 6 Press Set 7 Use 2 or 3 to select RX SETTINGS 8 Press SetReceiving faxes manually MANUAL MODE 12 Press Set 13 Press Stop/Reset10 Press Set Choose this mode ifCanceling receiving Receiving when an answering machine is connectedAdjusting the answering machine ANS.MACHINE MODEReports and lists Summary of reports and lists10-1 ChapterAdjusting the ACTIVITY REPORT setting ACTIVITY REPORTPrinting the ACTIVITY REPORT 10-2Adjusting the TX REPORT setting 10-34 Use 2 or 3 to select FAX SETTINGS 5 Press Set 6 Use 2 or 3 to select REPORT SETTINGS 7 Press Set twiceAdjusting the RX REPORT setting 10-44 Use 2 or 3 to select FAX SETTINGS 5 Press Set 6 Use 2 or 3 to select REPORT SETTINGS 7 Press SetPrinting the USER’S DATA LIST 10-51 Press Fax 2 Press Menu 3 Use 2 or 3 to select REPORTS/LISTS 4 Press SetChapter 10-6Reports and lists Maintenance When to replace an ink tankReplacing ink tanks GuidelinesReplacing an ink tank 11-21 Make sure the power is turned on 2 Press Open q and lift up the scanning unit wFlowchart of printhead maintenance Maintaining the printhead11-3 Perform deep printhead cleaning HEAD REFRESHING setting pCleaning the printhead Printing the nozzle check pattern11-4 3 Use 2 or 3 to select MAINTENANCE 4 Press Set twiceAligning the printhead 11-53 Use 2 or 3 to select MAINTENANCE 4 Press Set When all values have been entered, the LCD displays the followingPress Set Repeat steps 12 and 13 for column M 11-6Most solid box Cleaning your machine Cleaning the exteriorCleaning the interior Cleaning the scanning areaFax Model Cleaning the ADF area 11-85 Reconnect the power cord and turn on the power 4 Close the scanning unit until it locks into placeCleaning the roller 11-94 When you are finished, close the feeder cover until it clicks 5 Reconnect the power cord and turn on the power11-10 Maintenance ChapterTroubleshooting Problems installing and removing softwareMP Drivers/MP Toolbox Cannot install the software Installation or removal of the MP Toolbox cannot be completedProblems turning on the computer Problems printing from your computerCannot use the software after upgrading to Windows XP In Device Manager, green mark “?” is displayed Windows Me12-3 Cannot print to a shared printerPrinting stops in the middle Paper does not feed properlyMeaningless characters and symbols are printing Paper curlsWhite streaks appear on the printout Printout is rubbed or stainedPaper comes out but there is nothing copied on it Copying problems12-5 Problems scanning Copy quality is poor or documents are printed with streaksCannot scan a document 12-6When you click a key on the MP Toolbox, another application opens Computer has hung up or frozenTroubleshooting 12-7White margins appear around the scanned image White lines appear on the left side of the imageCannot scan correctly with multi-scan 12-8Problems receiving faxes 12-9Cannot receive a fax, cannot print a fax See below if you are having problems receiving faxesMachine does not switch automatically between voice and fax reception Repeated errors occur when you receive a faxCannot receive faxes automatically Quality of received fax is poorProblems sending faxes Cannot send a faxFax sent is dirty or documents are printed with streaks Cannot send a fax in ECM modeTelephone problems Problems using a memory cardRepeated errors occur when you send a fax Cannot dialThe Unplug/Eject icon does not appear Windows “?” is printed in the indexRemovable disk does not appear in Windows Explorer If nothing displays in the LCD if there is no power In Windows Explorer, you cannot display Thumbnails WindowsThe memory card is recognized as a drive other than Removable Disk 12-14 TroubleshootingIf the power disconnects unexpectedly Removing jammed paperRemoving jams in the paper output tray Removing jams from the machine’s interiorRemoving jammed documents If there are repeated paper jams1 Press Stop/Reset 2 If a multipage document is loaded, remove 12-16 Troubleshooting6 Lower the paper release lever A, then close the feeder cover 3 Open the feeder cover5 Pull out the jammed page from the ADF If the nozzle check pattern does not print properly Interpreting the messagesWhen the Alarm light blinks 12-18 TroubleshootingLCD messages CauseAction Details12-20 Troubleshooting 1 sec. key because there areTroubleshooting ChapterCause Action12-22 Troubleshooting Message Error codeCause ActionIf you cannot solve the problem 12-24 Troubleshooting ChapterMachine settings Printing a list to check the current settingsAccessing the machine settings 13-1Settings Menu SPECIAL COPYFunction key Copy 13-2Menu USER DATA Function keys Copy, Scan, Photo Print, Fax Model Fax AUTO PRINT OFF 13-4AUTO PRINT ON If you select FAX/TEL AUTO SW, DRPD, or FAX Fax Model Menu MEMORY REFERENCE Function key Fax Fax Model Menu RECEIVE MODEFax Model Menu REPORTS/LISTS Function key FaxMenu PHOTO PRINT MODE Function key Photo Print Machine settings13-8 Machine settingsSetting NameAppendix SpeciﬁcationsGeneral speciﬁcations Power sourceEnvelope printable areas Printable areasPaper printable areas Scanned area Ink speciﬁcationsBanner paper printable areas Print speciﬁcations Photo print speciﬁcationsCopy speciﬁcations Printing resolutionFax Model Fax speciﬁcations Fax resolutionApplicable line CompatibilityTelephone speciﬁcations ConnectionIndex IndexI-2 Index namesPROBLEM READING CARD message Indexfaxes and voice calls automatically 9-2 with answering machine connectedI-4 Index WRONG CARTRIDGE messageIndex IndexI-2 Index Index I-4 Index