Loading banner paper, For details, see p | Canon MultiPASS MP730

Loading banner paper

NOTE

•Always leave an extra sheet at the end of the banner—just in case the type runs over.

•Printing on banner paper may require considerable amounts of ink, so use new ink tanks if necessary.

•For best print results on banner paper, use light design patterns.

Follow this procedure to load banner paper in the multi-purpose tray:

1	Make sure the paper thickness lever is set to
	the right.
	• For details, see p. 3-5.
2	Remove the tray cover and multi-purpose
	tray, and place the machine near the edge
	of a table so that the paper can flow over the
	edge as it exits the machine.
3	Cut the banner paper to the required length
	and place it behind the machine on a flat	w	q
	surface. Then insert the first sheet and press		q
	surface. Then insert the first sheet and press
	gently down on the sheet q. Pinch and
	adjust the paper guide to the width of the
	paper w.

•Press down gently on the sheet until paper feeding starts.

•Make sure the sheets behind the machine are aligned with the first sheet.

4Set your computer to print on banner

paper.

• Allow the paper to flow over the edge of the table as it exits the machine.

3

Print media handling

Chapter 3

Print media handling

3-9

Image 34

Canon MultiPASS MP730, 730i Loading banner paper, Make sure the paper thickness lever is set to Right, For details, see p

Contents

User’s Guide Preface Copyright Trademarks How to use the documentation provided Set-Up Sheet Machine safely, always pay attention to these warnings Type conventionsMachine Contents Machine settings MaintenanceTroubleshooting Fax Model Receiving faxes Safety information Location Power Supply Viii Handling Fire Maintenance Users in the U.S.A Pre-installation requirements for Canon facsimile equipmentPower requirements Location Rights of the telephone company Connection of the equipmentCase of equipment malfunction FCC Notice Users in Canada Xiii XIV Canon Canada INC XVI Introduction What your machine can do Quick Reference Guide Unpacking your machineMulti-purpose tray Black, cyan, magenta, yellow Main components of the machine Operation panel of the machine 6Numeric keys 4Scan key5Photo Print key @2Fax Model Redial/Pause key Introduction Document handling Document requirements Loading documents Using the platen glassFax Model Using the ADF Lift the document cover Place your document face down on Plain Paper Print media handlingRecommended print media and requirements Envelopes Matte Photo Paper MP-101 High Resolution Paper HR-101NGlossy Photo Paper GP-301/GP-301N Photo Paper Plus Glossy PP-101 Photo Paper Pro PC-101S Photo Paper Pro PR-101Transparencies CF-102 Print media you cannot use General print media guidelinesShirt Transfers TR-201 Photo Paper Pro guidelines Press Open q and lift up the scanning unit w Setting the paper thickness leverMove the paper thickness lever to the appropriate setting Close the scanning unit until it locks into place Use 2 or 3 to select the print media size Setting the print media size and typePress Copy or Fax Model Fax Press Paper Select Press Set Loading paper Loading print mediaLoading envelopes Ensure that no curl or puff exceeds !/8 in mm Set your computer to print on banner Paper Loading banner paperMake sure the paper thickness lever is set to Right For details, see p Print media handling Compatible memory cards Photo printing from a memory cardRecommended print media Make sure the machine is on Inserting/removing a memory cardInserting a memory card Insert a memory card into the appropriate slot Removing a memory card Printing methods Select a printing method Load the correct print media in the multi-purpose tray Printing an indexUse 2 or 3 to select Index Press Set Use 2 or 3 to select ALL Frames Press Set Printing all framesPress Start Photo Paper PRO Plain Paper Use 2 or 3 to select borderless printing Use 2 or 3 to select Single Frame Press Set Printing a single frameUse the numeric keys to enter the frame number Use 2 or 3 to view your settings in the LCD Printing a range of frames Use 2 or 3 to select Frame Range Press Set Frame Range Photo LTR Chapter Plain LTR Setting vivid photo printing Setting date printing Reading data from or writing data to a memory card Enabling/disabling overwriting memory card data Card Protect Documents you can copy Setting color or black & white copyingCopying Making copies Press Image Quality Use 2 or 3 to select the image quality Adjusting the image quality resolutionAdjusting the exposure density Press Exposure Use 2 or 3 to select the exposure Press Set Reducing or enlarging a copy Using preset copy ratiosUsing custom copy ratios Copying an image to fit Advanced copy features Copying two pages on a single Borderless copying Press Menu Press Set Repeating an image on a Preparing your image to repeat it manually Use 2 or 3 to select Image Repeat Press Set Copying your imagePress Start If you selected Manual in step Press Set Creating a mirror image Use 2 or 3 to select Mirror IMAGE. Press Set Shrinking an image to fit Use 2 or 3 to select Entire Image Press Set Copying Guidelines for entering numbers, letters, and symbols Press T to switch to letter mode a or number mode Registering required sender information Slerexe Company Limited Entering the sender information Use 2 or 3 to select FAX Settings Press Set three timesPress Set Press Stop/Reset Press Menu Use 2 or 3 to select User Data Press Set Use 2 or 3 to select TEL Line Type Press Set Setting the telephone line typeUse 2 or 3 to select FAX Settings Press Set twice Use 2 or 3 to select the telephone line type Use 2 or 3 to select the week when daylight saving starts Setting daylight savingUse 2 or 3 to select System Settings Press Set Use 2 or 3 to select Daylght SAV Time Press Set Use 2 or 3 to select the week when daylight saving ends One-touch speed dialing Speed dialingSpeed dialing methods Coded speed dialing Registering one-touch speed dialing Use 2 or 3 to select a one-touch speed dialing key 01 to Changing or deleting an entry Use 2 or 3 to select Coded Speed Dial Press Set Registering coded speed dialingPress Menu Use 2 or 3 to select User Data Press Set twice Use 2 or 3 to select a coded speed dialing code 00 to Changing or deleting an entry Registering group dialing Use 2 or 3 to select Group Dial Press Set Changing or deleting an entry Using speed dialing Use 2 or 3 to select the list you want to print Printing speed dialing listsUse 2 or 3 to select Speed Dial List Press Set Touch List Coded Dial List Group Dial List Speed dialing Sending methods Sending faxesDocuments you can fax Memory sending Press Hook or lift the handset Dial the recipient’s number Manual sendingTalk through the handset to the recipient Press Image Quality Use 2 or 3 to select the resolution Setting color or black & white transmissionAdjusting the image quality fax resolution Improving faxed images Regular dialing Adjusting the scan exposureDialing methods PC dialing Manual redialing Customizing automatic redialing settingsRedialing a busy number Automatic redialing Use 2 or 3 to select Auto Redial Press Set Load the document on the platen glass or ADF Printing or deleting a document in memory Documents stored in memoryPrinting a list of documents in memory Memory Reference Marks before the transaction number Checking a document’s detailsTransaction number TX/RX no Displaying details of the transaction Switching temporarily to tone dialing Dialing through a switchboardSpecial dialing Receiving faxes Setting the receive modeUse 2 or 3 to select the receive mode Press Fax Press Menu Press Set Customizing FAX/TEL Auto SW Choose this mode ifUse 2 or 3 to select RX Settings Press Set You will need to Receiving faxes automatically FAX only Mode Setting the ring pattern Use 2 or 3 to select Drpdselect FAX Receiving faxes manually Manual Mode Canceling receiving Adjusting the answering machine 10-1 Reports and listsSummary of reports and lists Report or List Description Details Printing the Activity Report Adjusting the Activity Report setting10-2 Use 2 or 3 to select Report Settings Press Set twice Adjusting the TX Report setting10-3 10-4 Adjusting the RX Report settingUse 2 or 3 to select RX Report Press Set 10-5 Printing the USER’S Data ListUse 2 or 3 to select User Data List Press Set 10-6 Replacing ink tanks MaintenanceWhen to replace an ink tank Guidelines Replacing an ink tank 11-2 11-3 Flowchart of printhead maintenanceMaintaining the printhead Out correctly Use 2 or 3 to select the cleaning setting you want Cleaning the printheadPress Menu Use 2 or 3 to select Maintenance Press Set Printing the nozzle check pattern Use 2 or 3 to select Align Print Head Press Set Aligning the printhead11-5 Press T 11-6 Press Set Repeat steps 12 and 13 for column M Cleaning the exterior Cleaning your machineCleaning the interior Fax Model Cleaning the ADF area 11-8 Cleaning the roller 11-9 11-10Maintenance Chapter 12-1 TroubleshootingMP Drivers/MP Toolbox Cannot install the software Removal of the software was completed, but Canon remains Computer will not start Cannot use the software after upgrading to Windows XPDevice Manager, green mark ? is displayed Windows Me Cannot print at all Printing stops in the middle 12-3Cannot print to a shared printer Paper does not feed properly White streaks appear on the printout Meaningless characters and symbols are printingPaper curls Printout is rubbed or stained Is the document loaded correctly? 12-5Paper comes out but there is nothing copied on it Print the nozzle check pattern Maintaining the printhead, p Cannot scan a document Are you using a USB 2.0-compatible USB hub?Copy quality is poor or documents are printed with streaks 12-6 Computer has hung up or frozen If an error occurs when scanning an image in PhotoshopQuit other open applications and try again Cannot scan correctly with multi-scan White margins appear around the scanned imageWhite lines appear on the left side of the image 12-8 12-9 See below if you are having problems receiving faxesCannot receive a fax, cannot print a fax 12-10Troubleshooting Cannot receive a fax in ECM modeRepeated errors occur when you receive a fax Cannot receive faxes automatically Cannot send a fax Cannot send a fax in ECM modeFax sent is dirty or documents are printed with streaks Telephone disconnects during a call Repeated errors occur when you send a faxCannot dial Memory card is not recognized Removable disk does not appear in Windows Explorer Unplug/Eject icon does not appear Windows 12-14Troubleshooting If nothing displays in the LCD if there is no powerWindows Explorer, you cannot display Thumbnails Windows Removing jams in the paper output tray If the power disconnects unexpectedlyRemoving jammed paper Removing jams from the machine’s interior If there are repeated paper jams Removing jammed documentsPaying attention to the following points, reload the paper Chapter Troubleshooting Interpreting the messages When the Alarm light blinksIf the nozzle check pattern does not print properly If you cannot clear a paper jam LCD messages Cause Action Details 12-20Troubleshooting Message Error code Cause Action Details Memory Full Load PaperMachine in USE Memory 12-22Troubleshooting If you cannot solve the problem 12-24Troubleshooting Accessing the machine settings Machine settingsPrinting a list to check the current settings 13-1 Function key Copy SettingsName Description Setting Details 13-2 TEL Offhook Alarm FAX Settings User Settings Date & TimeDate Setup Volume Line Monitor 33600bps 13-415 SEC Printer Settings Quiet Mode SwitchDimension Large System Settings Function key Fax Name Description SettingFax Model Menu Memory Reference Function key Fax 13-6 Menu Photo Print Mode Function key Photo Print Vivid Photo Print 13-8Dpof Print Photo Date Speciﬁcations General speciﬁcations Paper printable areas Printable areasEnvelope printable areas Banner paper printable areas Ink speciﬁcationsScanned area Photo print speciﬁcations Print speciﬁcationsCopy speciﬁcations Fax Model Fax speciﬁcations Telephone speciﬁcations Connection Activity Report 10-1,10-2 Touch SPD Dial List 7-9,10-1Coded Speed Dial List 7-9,10-1 Group Dial List 7-9,10-1 Memory Clear Report DOC. Memory List 8-8,10-1Multi TX/RX Report Problem Reading Card message 4Index Key Interior 11-7 to On 1 copying Printhead + key Roller 2Index Problem Reading Card message TX/RX Cancelled message TX/RX NO. nnnn message