Turning the Machine ON and OFF

Turn on the machine before using.

„Turning on the Machine

Before turning on the machine, confirm that the FINE Cartridge is set into place.

Note

If preparatory operations are not yet finished, follow your setup sheet to complete them.

1 To turn on the machine, press [ON].

[ON] flashes green for a while, and then turns on.

Note

zIf an error message is displayed on the LCD, see “LCD Messages” on page 73.

zWhen the machine is left inactive for more than 4 minutes 30 seconds, the LCD goes off automatically and the machine enters the power saver mode. Press any button on the Operation Panel except for [ON] to restore the display.

„Turning off the Machine

1To turn off the machine, press [ON].

The machine is off after <SHUTTING DOWN...> is displayed on the LCD.

Important

zAlways turn off the machine before disconnecting the power cord. This ensures the FINE Cartridge is covered to prevent it from drying out.

zIf the machine is not used for an extended period of time, we recommend making copies or performing FINE Cartridge cleaning about once every month to prevent degradation of the FINE Cartridge.

zThe FINE Cartridge has many nozzles in order to produce high-definition prints. In the same way that the tip of a felt-tip or marker pen will naturally dry out over time and become unusable even with the cap in place, the nozzles might become clogged. Periodically printing or performing FINE Cartridge cleaning can help to prevent this kind of clogging.

zIf you change to another telephone line, turn off the machine before unplugging the telephone line cable.

Note

The power cannot be turned off with [ON] while the machine is operating.

12Before Using Your Machine