5
6
The fax returns to standby mode.
What is a Low Ink Warning?
The machine counts the amount of ink used and when the remaining level reaches a preset level the Low Ink Warning lamp beside the LCD display lights up to advise you that the FINE Cartridge is running out of ink.
z When <RECOMEND NEW CRT>, or <NO INK> appears on the LCD.
Press [Start/Copy]. Press [Stop/Reset].
Note
z The resulting print quality may not be satisfactory, if printing is continued under this condition. z When the ink level is low, the print quality may become poor, and the machine will start storing
incoming fax data in the memory.
z The FAX cannot detect whether or not the received data are clearly printed on the paper. z The FAX automatically deletes the received fax data in the memory after printing them. We
recommend you to set <SAVE RX IMAGE> to <ON> (see page 46). You can store the received fax data in the memory for no more than 30 transactions. Delete them before the memory becomes full.
z Setting Automatic Printing
When the ink is low, you can set the receiving fax either automatic printing or storing in memory. 1 Press [Menu].
2 Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The LCD displays <USER SETTINGS>.
3 Use [{] or [}] to select <RX SETTINGS>, then press [Start/Copy]. The LCD displays <ECM RX>.
4 Use [{] or [}] to select <OPTION SETTINGS>, then press [Start/Copy]. The LCD displays <OFF>.
z To disable ink low automatic printing, use [{] or [}] to select <OFF>. z To enable automatic printing, use [{] or [}] to select <ON>.
RECOMEND NEW CRT ] NO INK
The ink level of the FINE Cartridge showing <RECOMEND NEW CRT> is low. The ink level of the FINE Cartridge showing <NO INK> is empty. You should ensure you have a new FINE Cartridge.
zWhen <INK VOL UNKNOWN> appears on the LCD.
INK VOL UNKNOWN
If you install the FINE Cartridge that was once empty, <INK VOL UNKNOWN> appears in the LCD. The function for detecting the remaining ink level will be disabled since the ink level cannot be correctly detected.
If you want to continue printing without this function, press [Stop/Reset] for at least 5 seconds.
Routine Maintenance | 51 |