Name

Description

Settings

ACTIVITY REPORT

Enable/disable automatic printing of the ACTIVITY REPORT.

AUTO PRINT

When you set ON, your fax is set to print the ACTIVITY

ON/OFF

 

REPORT for every 20 transactions (sending and receiving).

 

TX/RX SEPARATE

Divide the activity management report into sent and received

ON/OFF

 

transactions.

 

„TX SETTINGS

Name

Description

Settings

ECM TX

Enable/disable error correction during transmission.

ON/OFF

PAUSE TIME

Set the length of the pause you insert into a dialing sequence.

1 to 9 seconds

AUTO REDIAL

Determine whether the fax will redial a number if it fails to get

ON/OFF

 

a response on the first attempt.

 

REDIAL TIMES

Set the number of retries.

1 to 10 times

REDIAL INTERVAL

Set the period of time between redialing attempts.

2 to 99 minutes

DIAL TONE DETECT

Set whether to send faxes after detecting the dial tone. This

ON/OFF

 

function may not work correctly with some telephone lines.

 

„RX SETTINGS

Name

Description

Settings

ECM RX

Enable/disable error correction during reception.

ON/OFF

FAX/TEL AUTO SW

This feature is used to answer calls, and if no fax tone is

 

detected, the fax rings to alert you of an incoming call.

 

RING START TIME

Set the duration that the fax listens for a fax tone before

0 to 20 seconds

 

starting to ring.

 

TEL RING TIME

Set the length of time the fax will ring to alert you of an

10 to 45 seconds

 

incoming call.

 

DEFAULT ACTION

Select the action taken after the TEL RING TIME expires.

DISCONNECT/

 

 

RECEIVE

INCOMING RING

Set the fax to ring when it receives a call.

ON/OFF

RING COUNT

Set the number of incoming rings before the fax answers.

2 to 30 times

MAN/AUTO SWITCH

Determine if the fax switches to document receive mode after

ON/OFF

 

the fax rings for a specified time when the fax is in the manual

 

 

receive mode.

 

RING TIME

Set the amount of time the fax will ring before switching to

1 to 60 seconds

 

document receive mode.

 

REMOTE RX

Enable/disable remote receiving.

ON/OFF

REMOTE RX ID

If you set REMOTE RX to ON, you can select the remote

00 to 99

 

receiving ID.

 

SAVE RX IMAGE

Set whether to save images received.

ON/OFF

OPTION SETTINGS

Set whether the fax prints out received documents even

ON/OFF

 

when the ink level is low. Faxes will be deleted from memory

 

 

after printing. If there is no ink left, the information contained

 

 

in the fax will be lost.

 

 

This setting will be retained even if the FINE cartridge is

 

 

replaced with a new cartridge.

 

DRPD:SELECT FAX

If you select DRPD as the receive mode, select the ring

DOUBLE RING/

 

pattern for the fax.

SHORT-SHORT-LONG/

 

 

SHORT-LONG-

 

 

SHORT/

 

 

OTHER RING TYPE/

 

 

NORMAL RING

46Settings and Activity Reports