Errors Occur Frequently While Receiving
Cause | Action |
The telephone lines may be in poor | Lower the reception speed (see <RX START SPEED> on page 47). |
condition, or you may have a bad |
|
connection. |
|
The sending fax machine may not be | Call the sender and have them check that their fax machine is functioning |
functioning properly. | properly. |
Copying Problems
The Fax Does Not Make a Copy
Cause | Action |
The FINE Cartridge may need to be | Determine if the problem is with the FINE Cartridge and replace if necessary |
replaced. | (see page 50). |
The document may not have been | z Remove the document, stack it if necessary, and load it face up into the ADF |
loaded correctly into the ADF. | correctly (see page 22). |
| z Make sure the Cover is closed. |
The FINE Cartridge may not be | Make sure the FINE Cartridge is installed properly (see your setup sheet or |
installed properly. | page 50). |
Print head nozzles are clogged. | Print the nozzle check pattern (see page 53). |
<MEMORY FULL> Appears on the LCD When Making Multiple Copies
Cause | Action |
The fax’s memory is full. | z Print or delete any documents stored in memory (see page 39) to free up |
| space in the fax’s memory, then start again. |
| z Change the scanning resolution and try copying again. |
The document you are copying may | If multiple pages are being copied, separate the pages into smaller stacks. If |
have too many graphics. | not, make the desired number of copies one at a time as needed. |
Troubleshooting 65