Setting Caller ID

If the <CALLER ID> setting is set to <ON>, the caller’s name and phone/fax number appear on the LCD when you receive a call.

Note

zTo use this feature, you will need to subscribe for a caller ID service. The <CALLER ID> feature uses the Telcordia or the ETSI EN 300 778-1 protocol. Contact your local telephone company for detailed information on this service.

zIf the <CALLER ID> setting is set to <ON>, the machine will not enter the power saver mode (see page 12).

1 Press [Menu].

2 Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy].

3 Use [{] or [}] to select <CALLER ID>, then press [Start/Copy]. The LCD displays <OFF>.

4 Use [{] or [}] to select <ON> to enable the <CALLER ID> feature, then press [Start/Copy].

To disable the <CALLER ID> feature, use [{] or [}] to select <OFF>, then press [Start/Copy].

5 Press [Stop/Reset].

Setting ends and the fax returns to standby mode.

Documents Stored in Memory

„Printing the MEMORY LIST

Your fax can print a list of documents stored in memory, along with the transaction number (<TX/ RX NO.>) of each document. Once you know the transaction number of a document in memory, you can print it or delete it.

1 Press [Menu].

2 Use [{] or [}] to select <MEMORY REFERENCE>, then press [Start/Copy]. 3 Use [{] or [}] to select <DOC. MEMORY LIST>, then press [Start/Copy].

„Printing a Document in Memory

1 Press [Menu].

2 Use [{] or [}] to select <MEMORY REFERENCE>, then press [Start/Copy]. 3 Use [{] or [}] to select <PRINT DOCUMENT>, then press [Start/Copy].

TX/RX NO.

0001

 

 

Receiving Faxes

39