3 Use [{] or [}] to select <SCAN CONTRAST>, then press [Start/Copy]. The LCD displays <STANDARD>.

4 Use [{] or [}] to adjust the scanning contrast, then press [Start/Copy].

You can select <STANDARD>, <DARKER> or <LIGHTER>.

5 Press [Stop/Reset].

Setting ends and the fax returns to standby mode.

Automatic Dialing

„Sending a Document Using One-Touch Speed Dialing or Coded Speed Dialing Numbers

To use this feature you must first register numbers for one-touch speed dialing (see page 18) or coded speed dialing (see page 19).

1 Load the document face up into the ADF.

See “Loading Documents and Paper” on page 22.

You can set the scanning resolution and the contrast (see page 25).

2 Press the one-touch speed dialing button under which the number you wish to fax is registered.

01=CANON

-or-

Press [Coded] and enter the appropriate two-digit coded speed dialing code.

The registered name and number appear.

If you make a mistake, press [Stop/Reset]. Then press the correct one-touch speed dialing button or press [Coded] and re-enter the code.

01=CANON

3 Press [Start/Copy].

The fax begins sending. -or-

After about 10 seconds of no operation panel input, the fax starts sending automatically.

26Sending Faxes