3 Prepare the FINE Cartridge.
Caution
zDo not touch internal parts other than the Holder.
zDo not drop or shake FINE Cartridge as this may cause the ink to leak out and stain your clothes and hands.
Important
zDo not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The machine may not print out properly if you touch it.
zDo not reattach the protective tape once it has been removed.
zHandle the removed protective tape carefully to avoid getting your hands dirty or staining surrounding work area.
4 Install the FINE Cartridge.
Important
zMake sure that the FINE Cartridge is installed in the correct position. The machine cannot be used unless the FINE Cartridge is installed.
zIf the Cover is left open for more than 10 minutes, the Holder moves to the right side. Close and reopen the Cover to return the Holder to the left.
zOnce you have installed the FINE Cartridge, <CART. RETURN> is displayed on the LCD. Wait until the standby screen is displayed before proceeding. It takes about one to two minutes.
Note
zThe machine may make some operating noises when preparing to print. This is normal operation.
zAn error message will be displayed on the LCD if a FINE Cartridge is not installed properly. Open the Cover and make sure that position of the FINE Cartridge is appropriate.
Select the receive mode according to your needs. See “Different ways to receive a document” on page 33.
zReceiving both documents and telephone calls automatically: <Fax/Tel Mode>/<DRPD>
zReceiving documents manually:
<MANUAL MODE>
zReceiving documents with an answering machine:
<ANS.MACHINE MODE>
zReceiving documents automatically and disconnects telephone calls:
<FAX ONLY MODE>
Note
To use a fax, you need to set the telephone line type setting properly on the machine. For details on how to confirm and change this setting, see “Setting the Telephone Line Type” on page 14.
If you are unsure of your telephone line type, contact your telephone company.
Introduction 7