2
3 Gently remove the jammed paper inside the fax.
4 Press [Stop/Reset].
The fax returns to standby mode.
If the Power Disconnects Unexpectedly
The date and time setting on your device will be kept. All documents stored in memory will be deleted.
If the power disconnects, the following will apply:
zYou will not be able to send or receive faxes or make copies.
zIf a telephone is connected to the machine, you can receive voice calls.
zWhether you are able to make voice calls or not depends on your telephone type.
Paper Feeding Problems
Paper Does Not Load
Cause | Action |
The Rear Tray may contain too many | Make sure the paper stack in the Rear Tray does not exceed the paper limit |
sheets. | mark ( ) (see page 22). |
Paper may not be loaded correctly. | Make sure the paper stack is loaded properly in the Rear Tray, and that the |
| Paper Guide is adjusted correctly (see your setup sheet or page 22). |
Paper is Loaded Skewed (Printing is Skewed)
Cause | Action |
Paper may not be loaded correctly. | z Make sure the paper stack is loaded properly in the Rear Tray, and that the |
| Paper Guide is adjusted correctly (see your setup sheet or page 22). |
zMake sure the right edge of the paper stack is aligned with the right side of the Rear Tray and the Paper Guide is aligned with the left edge of the stack (see your setup sheet or page 22).
zMake sure the paper exit path is clear.
Multiple Sheets Load Into the Fax at the Same Time
Cause | Action |
Paper may not be loaded correctly. | Make sure the paper stack is loaded properly in the Rear Tray, and that the |
| Paper Guide is adjusted correctly (see your setup sheet or page 22). |
Sheets of paper may be sticking | Be sure to tap the stack on a flat surface before loading it in the Rear Tray. This |
together. | keeps the sheets of paper from sticking together. |
The Rear Tray may contain too many | z Make sure the paper stack in the Rear Tray does not exceed the paper limit |
sheets. | mark ( ) (see page 22). |
| z Do not exceed the maximum loading capacity of the Rear Tray (see |
| page 79). |
| z Do not force the paper stack into the Rear Tray. |
|
|
Troubleshooting 61