Recording and Playing Audio

 

Playing Back Audio

 

 

• The audio playback screen shown below will be on the

 

 

 

display.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio file number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

You can start audio playback operations from the rhythm

 

 

 

 

 

 

 

 

 

 

 

 

mode or the song sequencer mode. You cannot start from

 

 

 

 

 

 

 

 

 

 

 

 

the card mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

You can perform normal keyboard play along with audio

 

 

 

 

 

 

 

 

 

 

 

 

playback, and you can use layer and split. The procedures

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

for selecting UPPER 1, UPPER 2, and LOWER parts are

 

 

 

 

 

 

 

 

 

 

 

 

the same as the ones used in the rhythm mode. For details,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

see “Selecting a Tone” (page E-14) and “Layering and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio file name

 

 

Time counter (minutes:seconds)

 

Splitting Tones” (page E-15).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

Maximum polyphony is reduced by a maximum of two

 

 

 

 

 

 

 

 

 

 

 

 

notes during audio playback.

 

 

• If there is an asterisk (*) in front of the audio file

•

Rhythm play and song sequencer song playback cannot be

 

 

 

 

number, it means the file already includes recorded

 

performed during audio playback standby and audio

 

 

 

 

 

data.

 

 

 

 

 

 

 

playback.

 

 

 

 

 

 

 

 

 

 

2. Use the dial or the R-14 (–, +) buttons to select

•

The time counter displayed during audio playback does not

 

 

exactly match the time counter displayed during recording.

 

 

one the audio file numbers that has an asterisk

 

 

 

 

 

 

Supported Audio Playback Files

 

 

(*) in front of it.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Configure the following setting as required.

This Digital Keyboard supports playback of audio files

recorded by it, as well as audio files that you converted on a

 

 

 

 

 

 

 

 

 

 

 

 

 

To do this:

 

 

 

Do this:

computer to a format supported by the Digital Keyboard.*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Start playback from

 

Use the L-15 (dFF) and L-14

*

Special application software (Data Manager) is required in

 

 

 

order to convert audio files. For details, see “Storing and

 

any location

 

(sREW) buttons to change the time

 

 

(minutes : seconds)

 

counter reading to the location

 

Loading Digital Keyboard Memory Data” (page E-146).

 

 

 

 

 

 

 

 

(hours:minutes) from which you want

 

 

 

 

 

 

 

 

 

To play back a recorded audio file

 

 

 

 

 

to start playback.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Center cancel*

 

Press the L-18 (PART SELECT)

1. Press the C-2 (AUDIO PLAY) button.

 

 

 

 

 

button.

 

• This causes the >indicator to appear and the other

 

* For details, see “About center cancel” (page E-127).

 

mode indicator (: or <) to disappear

 

 

 

 

 

 

 

 

 

 

 

 

 

 

from the display, which indicates the audio play mode.

 

 

 

 

 

 

 

 

 

 

 

•The L-17 (PLAY/STOP) button will flash, which indicates audio playback standby.

E-126