song area number you want to copy from.
E-82
Use the dial or R-14(–, +) buttons to specify the
3.
• An asterisk (*) next to a song area number indicates that there is already data recorded in that area.
• You can select “All” here to clear all songs.
4. Press the R-16 (ENTER) button.
5. In response to the “Sure?” message that appears, press the R-14 (YES) button to clear or the R-14 (NO) button to cancel.
To copy a song from one area to another
1. Perform the procedure under “To start a song editor operation” on page E-81 to display the song editor menu.
2. Use the R-17 (t, y) buttons to move the 0 to “Copy” and then press the R-16 (ENTER) button.
• This displays the “Copy Song” screen. At this time the thick brackets (%) will be located at the “Copy” setting.
Use the dial or R-14(–, +) buttons to specify the song area number you want to clear.
3.
Press the R-16 (ENTER) button.
• This displays the “Clear Song” screen.
2.
Using the Song Sequencer
To clear a song
1. Perform the procedure under “To start a song editor operation” on page E-81 to display the song editor menu, with the 0 located at “Clear”.

4.Press the R-17 (y) button to move the thick brackets (%) to “To”.

•An asterisk (*) next to a song area number indicates that there is already data recorded in that area.

5.Use the dial or R-14 (–, +) buttons to specify the song area number you want to copy to.

6.Press the R-16 (ENTER) button.

•If the copy destination song area does not contain recorded data, the copy operation is performed immediately.

•If the copy destination song area already contains recorded data, the confirmation message shown below appears asking if you want to overwrite the existing data.

Press the R-14 (YES) button to perform the copy operation and overwrite the existing song or the R-14 (NO) button to cancel.