Casio CTK-7000, WK-7500, WK7500E1A manual 73

					Using the Song Sequencer
	System Track and Track 01 through 16
	Common Recording Content
•			Due to the way song parts are configured, settings
■ Recording Start				configured by a recalled registration are applied to different
				numbered parts than they were assigned to when the setup
•		Beat setting
				was saved, as shown below.
•		Rhythm selection
				Parts when registration		Parts when registration is
• Tempo setting
				setup is saved		recalled for song recording
•		Scale setting
• The mixer settings below			UPPER 1 part (A01)			UPPER 1 part (A05)
		– All part parameters from A04 through A07 and B01
			UPPER 2 part (A02)			UPPER 2 part (A06)
		through B16 (Excluding part on/off)
		– Part parameters from A09 through A16: part on/off,	LOWER part (A03)			LOWER part (A07)
		coarse tune, fine tune, scale enable, DSP line
			Auto Harmonize tone part			Auto Harmonize tone part
		– DSP parameters: volume, pan, reverb send
			(A04)			(A04)
•		Effect settings
• Accomp volume				For details about the configuration of song parts, see
■ During Recording				“Songs, tracks, and parts” (page E-70).
			• The moment you call up a registration setup or One Touch
• Keyboard play
				Preset while recording, the setting information registered
•		Pitch bender operations
				with the registration setup or One Touch Preset is recorded
•		Pedal operations
				to the system track. The registration setup or One Touch
•		The button operations below
				Preset itself is not recorded.
		S-2 (MODULATION), D-1 (ROTARY SLOW/FAST),
		D-2 (PERCUSSION SECOND), D-3 (PERCUSSION THIRD)	Track 01 through 16 Recording Content
•		D-4 (16') through D-12 (1') slider operations
	System Track Recording Content		■ Recording Start
			•	Part tone selection for the track
■ Recording Start			■ During Recording
• Tones for the UPPER 1, UPPER 2, and LOWER parts			•	Part tone selection for the track
•		Layer and split on/off
			•	The mixer settings below
•		Split point setting
				– All part parameters from B01 through B16
• Octave shift for the UPPER 1, UPPER 2, and LOWER parts
				(except part on/off)
• The function menu item settings below (page E-131)
		– Arpeggiator hold, arpeggiator speed, arpeggiator part	Panel Settings and Header Settings
•		Auto harmonize or arpeggiator on/off and type
•		Synchro standby (Normal, Variation, Intro)	Before starting recording with the song sequencer, you need
• Music preset (Only when using EASY REC.)			to select the tone and rhythm, and also configure other
■ During Recording			settings such as tempo, mixer settings, etc. These are called
			“panel settings” because they are configured using the Digital
•		Rhythm selection
			Keyboard’s control panel. When you start recording, panel
•		Tempo setting	settings are stored in the header of the song. Settings in the
•		All of the items under “Recording Start” above, except for	header of a song are called “header settings”.
		the function menu item settings and split point setting	•	The “Recording Start” settings under “System Track and
• Chord play using the chord keyboard				Track 01 through 16 Common Recording Content” (page
•		The rhythm controller operations below		E-71), “System Track Recording Content” (page E-71) and
		L-13 (INTRO), L-14 (NORMAL/FILL-IN),L-15		“Track 01 through 16 Recording Content (page E-71) are
		(VARIATION/FILL-IN), and L-16 (SYNCHRO/ENDING)		stored as header settings.
		button operations	•	Only header settings can be changed after song recording
•		Settings recalled from registration memory		is complete. For details, see “Using Panel Record to
• Settings recalled using One Touch Preset				Rewrite Song Header Settings” (page E-78).

E-71