Using the Song Sequencer

3.Press the C-12 (COPY) button.

•This displays the “Copy” screen.

•If you have already specified a range using the locator screen (page E-80), that range will be displayed on the range specification screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Copy destination point

Copy source range (start point - end point)

4.

Use the R-17 (u, i) buttons to move the

 

 

cursor, and then use the dial or R-14 (–, +)

 

 

buttons to change the value at the cursor

 

 

position.

5.

After everything is the way you want, press the

 

 

R-16 (ENTER) button.

6.

In response to the “Sure?” message that

To quantize an individual note event

1.Display the event editor screen of the track that includes the event you want to quantize.

•See “To select a track for editing” (page E-91).

2.Use the R-17 (t, y) buttons to move the cursor to the event you want to quantize.

3.Press the C-13 (QUANTIZE) button.

•This displays the “Quantize” screen.

4.Use the dial or R-14 (–, +) buttons to change the setting in the thick brackets (%) to “Cursor”.

5.Specify the note you want to use as the quantize reference note.

To specify this type of

appears, press the R-14 (YES) button to copy or

the R-14 (NO) button to cancel.

note:

Press this button:

•

Pressing the R-14 (YES) button executes the copy

 

operation. The message “Complete” appears and the

 

display returns to the “Copy” screen after the copy is

 

complete.

•

At this time, the “Copy destination position” value on

 

the locator screen moves forward by the length

 

specified by “Copy source range”.

1

2

018:01:00 020:01:00 024:01:00 026:01:00

If you want to continue by copying the same copy source range to another location, repeat steps 5 and 6 again.

7.To return to the event editor screen, press the R-15 (EXIT) button.

QuarterR-3 (2)

EighthR-7 (6)

SixteenthR-8 (7)

Thirty-secondR-9 (8)

Triplet*R-10 (,)

*For a triplet, first select the note and then add the triplet. To specify a triplet made up of quarter notes, for example, press the R-3 (2) button and then the R-10 (,) button.

6.After everything is the way you want, press the R-16 (ENTER) button.

•This performs quantization and returns to the event editor screen.

E-95