Selecting and Playing a Tone

Using the Metronome

1.Press the L-10 (METRONOME) button.

•This will start the metronome.

•The display will show the tempo along with a count of the measures and beats since you started the metronome.

TempoBeat

Measure

2.Press the L-10 (METRONOME) button again to stop the metronome.

To change the beats per measure

1.Hold down the L-10 (BEAT) button until the metronome beat screen shown below appears on the display.

2.Use the dial or R-14 (–, +) buttons to select a beat setting.

•You can select 0, or a value within the range of 2 to 6. Specifying 0 for this setting will cause each beat to be indicated by the same sound (no chime at the beginning of each measure).

3.Press the L-10 (BEAT) or R-15 (EXIT) button.

•This exits the metronome beat screen.

To change the tempo setting

There are two different methods you can use to change the tempo setting: using the TEMPO buttons or tapping a beat with a button.

■To change the tempo using the TEMPO buttons

1.Press the L-11 (TEMPO w) (slower) or L-12 (TEMPO q) (faster) button.

•This displays the tempo screen shown below.

•If you do not perform any operation for a few seconds, the display will return to previous screen automatically.

2.Use the L-11 (TEMPO w) and L-12 (TEMPO q) buttons to change the tempo (beats per minute).

•Holding down either button will scroll the setting values at high speed.

•You can specify a tempo value in the range of 30 to 255.

3.Press the R-15 (EXIT) button.

•This exits the tempo screen.

E-19