Using the Song Sequencer

To delete one or more measures from a song

1.Perform the procedure under “To start a song editor operation” on page E-81 to display the song editor menu.

2.Use the R-17 (t, y) buttons to move the 0to “DeleteMeas.” and then press the R-16 (ENTER) button.

•This causes “Delete Measure” screen to appear. At this time the thick brackets (%) will be located at the “Measure” setting.

3.Use the dial or R-14 (–, +) buttons to specify the song measure you want to delete.

4.Press the R-17 (y) button to move the thick brackets (%) to “Size”.

5.Use the dial or R-14 (–, +) buttons to specify the number of measures you want to delete.

6.After everything is the way you want, press the R-16 (ENTER) button.

7.In response to the “Sure?” message that appears, press the R-14 (YES) button to delete or the R-14 (NO) button to cancel.

To insert blank measures into a song

1.Perform the procedure under “To start a song editor operation” on page E-81 to display the song editor menu.

2.Use the R-17 (t, y) buttons to move the 0to “InsertMeas.” and then press the R-16 (ENTER) button.

•This causes “Insert Measure” screen to appear. At this time the thick brackets (%) will be located at the “Measure” setting.

3.Use the dial or R-14 (–, +) buttons to specify the song measure number from which you want the insert to start.

4.Press the R-17 (y) button to move the thick brackets (%) to “Size”.

5.Use the dial or R-14 (–, +) buttons to specify the number of measures you want to insert.

•For example, specifying 002 for “Measure” and 003 for “Size” will insert three blank measures in front of song measure 2.

6.After everything is the way you want, press the R-16 (ENTER) button.

7.In response to the “Sure?” message that appears, press the R-14 (YES) button to insert or the R-14 (NO) button to cancel.

E-83