Music Presets

6.Use the R-17 (y) button to move the 0to “Store” and then press the R-16 (ENTER) button.

•This displays a screen for specifying the destination user preset number and name.

Save destination user preset number

User preset name

7.Use the dial or R-14 (–, +) buttons to select the destination user preset number you want.

8.Use the R-17 (u, i) buttons to move the cursor to the name character position you want to change, and then use the dial or R-14 (–, +) buttons to select the character you want.

•For details about the characters you can input, see “Supported Input Characters” (page E-160).

•To input a space, press both of the R-14(–, +) buttons at the same time.

9.After everything is the way you want, press the R-16 (ENTER) button.

•This saves the data.

•If the user preset number where you are saving the data already has data saved to it, a message (Replace?) will appear on the display to confirm whether you want to replace the existing data with the new data. Press the R-14 (YES) button to replace the existing data with the new data.

•The message “Please Wait” will remain on the display while a data save operation is in progress. Do not perform any other operation while it is displayed. Turning off the Digital Keyboard or removing the memory card can cause Digital Keyboard data to be deleted or become corrupted. It also can cause the Digital Keyboard to fail to turn on when the L-1 (POWER) button is pressed. If this happens, refer to “Troubleshooting” (page E-150).

•Pressing the R-15 (EXIT) button in place of step 6 displays the confirmation screen shown below. Pressing the R-14 (YES) button at this time will display the user preset save screen in step 6.

To cancel the editor operation without saving the edited results, press the R-14 (NO) button.

To clear user preset data

1.While holding down the R-13 (FUNCTION) button, press the C-17 (MENU) button to display the MP (music preset) editor screen.

2.Use the R-17 (y) button to move the 0to “Clear” and then press the R-16 (ENTER) button.

•This displays a screen for specifying the number of the user preset you want to clear.

3.Use the dial or R-14 (–, +) buttons to specify the number of the user preset you want to clear.

4.Press the R-16 (ENTER) button.

5.In response to the “Sure?” message that appears, press the R-14 (YES) button to clear or the R-14 (NO) button to cancel.

E-59