6. Press the R-16 (ENTER) button.
7. In response to the “Sure?” message that appears, press the R-14 (YES) button to delete or the R-14 (NO) button to cancel.
• Pressing the R-14 (YES) button displays the message “Please Wait” (indicating the operation is in progress). Do not perform any operation while this message is on the display. “Complete” appears on the display after the operation is complete.
Use the dial or R-14(–, +) buttons to display the file you want to delete.
5.
Use the R-17 (t, y) buttons to move the 0to “FileDelete” and then press the R-16 (ENTER) button.
• This displays a screen for specifying the file to be deleted.
4.
To delete a file from a memory card
1. Insert the memory card into the card slot.
2. Press the C-9 (CARD) button to enter the card mode.
3. While holding down the R-13 (FUNCTION) button, press the C-17 (MENU) button.
• This displays the function menu “Play/CardUtl” screen.

Using a Memory Card

To rename a file on a memory card

1.Insert the memory card into the card slot.

2.Press the C-9 (CARD) button to enter the card mode.

3.While holding down the R-13 (FUNCTION) button, press the C-17 (MENU) button.

•This displays the function menu “Play/CardUtl” screen.

4.Use the R-17 (i, y) buttons to move the 0to “FileRename” and then press the R-16 (ENTER) button.

•This displays a screen for specifying the file to be renamed.

5.Use the dial or R-14 (–, +) buttons to display the file you want to rename.

6.Use the R-17 (u, i) buttons to move the cursor to the name character position you want to change, and then use the dial or R-14 (–, +) buttons to select the character you want.

•For details about the characters you can input, see “Supported Input Characters” (page E-160).

•To input a space, press both of the R-14(–, +) buttons at the same time.

7.After the name is the way you want, press the R-16 (ENTER) button.

8.In response to the “Sure?” message that appears, press the R-14 (YES) button to rename the file or the R-14 (NO) button to cancel.

•Pressing the R-14 (YES) button displays the message “Please Wait” (indicating the operation is in progress). Do not perform any operation while this message is on the display. “Complete” appears on the display after the operation is complete.

E-141