Using the Song Sequencer

5. Use the R-17 (y) button to move the 0 to

 

4. Press the L-17 (START/STOP) button.

 

“PanelRecord”.

 

This starts playback. The following operations are

 

 

 

 

supported during playback.

 

 

 

 

 

 

 

 

To do this:

Do this:

 

 

 

Fast forward

Hold down the L-15 (dFF) button.

 

 

 

 

 

 

 

 

Fast backward

Hold down the L-14 (sREW) button.

 

 

 

 

 

 

 

 

Pause

Press the L-16 (PAUSE) button.

 

 

 

 

 

 

 

 

Restart paused

Press the L-16 (PAUSE) button.

 

 

 

playback

 

 

 

 

 

 

6. Press the R-16 (ENTER) button.

 

Perform repeat

Perform steps 3 through 5 under “To

 

playback

repeat play a specific section of a

7. In response to the “Sure?” message that

 

 

 

song” (page E-144).

 

 

 

 

 

Even while playback is paused, you can still perform

 

appears, press the R-14 (YES) button to execute

 

 

 

 

fast forward playback by holding down the L-15

 

the panel record operation or the R-14 (NO)

 

 

 

 

 

(dFF) button or fast backward playback by holding

 

button to cancel.

 

 

down the L-14 (sREW). Releasing either button goes

 

 

 

 

back into pause.

 

 

 

While playback is in progress or playback standby, you

 

Playing a Recorded Song

 

 

 

can use the R-17 (u, i) buttons to select the track

This section explains how to perform the following operations

 

 

you want. Playing keyboard keys sounds the parts that

 

 

correspond to the currently selected track (A04 to A07

on songs recorded in the song sequencer mode.

 

 

 

 

for the system track).

Play a song.

 

 

 

Playback stops automatically when it reaches the end

Fast forward, fast backward, pause, unpause.

 

 

 

of a song. To stop playback part way through, press the

Play a specific part in a song.

 

 

 

 

L-17 (START/STOP) button.

 

 

 

 

Repeat play a specific section of a song.

Assign a name to a song.

Delete a song.

To play a recorded song

1.Press the C-5 (SONG SEQUENCER) button to enter the song sequencer mode.

2.Use the dial or R-14 (–, +) buttons to select a song area number.

3.Configure mixer settings, tempo, and other panel settings you want to use for playback.

To change the system track UPPER 1, UPPER 2, and LOWER part tones or mixer settings, use the mixer to change the settings of parts A05 (UPPER 1), A06 (UPPER 2), and A07 (LOWER).

The above settings are not required if you want to play the song as it was recorded.

E-79